Make sure this part fits

GM 10438533
Door Actuator

2001-2007 GM

Customer Questions & Expert Answers (14)
GM 10438533 Door Actuator
  • Part Description
    Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    2001-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    2001-2004 Oldsmobile SilhouetteGL, GLS, Premiere6 Cyl 3.4 L GAS
    2001-2005 Pontiac AztekBase, GT, Rally6 Cyl 3.4 L GAS
    2001-2005 Pontiac MontanaBase6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10438533 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10438533 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the I/P compartment for the 2004 Buick Rendezvous? Posted by Customer
    A:
    Disconnect and remove the right hand temperature door lever spring and the right hand temperature lever from the right hand temperature door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the installation process for the left hand air temperature actuator for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Position the left hand air temperature actuator and secure it with the mounting screws, tightening them to 1.6 N.m (14 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the first step to service and repair the Air Temperature Actuator for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Begin by removing the knee bolster.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after securing the air temperature actuator for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Reconnect the electrical connector for the left hand air temperature actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the torque specification for tightening the mounting screws for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Tighten them to 1.6 N.m (14 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How do you disconnect the air temperature actuator for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Disconnect the air temperature actuator electrical connector, remove the mounting screws, and take out the air temperature actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the next step after setting the HVAC controls for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Remove the left hand temperature door lever bolt from the HVAC module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be connected to the temperature door lever and HVAC module case for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Connect the temperature door lever spring.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How should the actuator be secured for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Secure the actuator with the retaining screws, tightening them to 1.6 N.m (14 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the final step in the installation process for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Install the left hand temperature door lever bolt and tighten it to 0.9 N.m (8 lb in), then finally reinstall the knee bolster.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the first step to replace the air temperature actuator for the 2001 Chevrolet Venture? Posted by Customer
    A:
    First, remove the left IP insulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the first step to replace the air temperature actuator for the 2003 Chevrolet Venture? Posted by Customer
    A:
    First, remove the knee bolster.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the next step after removing the temperature lever for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Disconnect the right hand temperature actuator electrical connector and remove the mounting screws to take out the actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Door Actuator 10438533 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10438533 Door Actuator is available in the market under the name GM Blend Door Actuator. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10438533 Door Actuator fits certain Chevrolet Venture models, as well as Buick Rendezvous. Additionally, it is compatible with Pontiac Aztek, Montana and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 10438533 maintains top performance when functioning as the Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator unit. The component 10438533 is constructed from durable material and its dimensions span 4.3 x 4.1 x 2.1 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Actuator; Actuator, A/C Control. The part 10438533 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.