Make sure this part fits

GM 10424941
Actuator, Driver Side

2001-2007 GM

Customer Questions & Expert Answers (14)
GM 10424941 Actuator, Driver Side
  • Part Description
    Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator
  • Position
    Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    2001-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    2001-2004 Oldsmobile SilhouetteGL, GLS, Premiere6 Cyl 3.4 L GAS
    2001-2005 Pontiac AztekBase, GT, Rally6 Cyl 3.4 L GAS
    2001-2005 Pontiac MontanaBase6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10424941 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10424941 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after disconnecting the electrical connector for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Remove the mounting screws and the actuator itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the next step after connecting the electrical connector for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Reinstall the left hand temperature door lever onto the left hand temperature door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the next step after reconnecting the electrical connector for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Reinstall the left hand temperature door lever onto the left hand temperature door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the first step in the installation process for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Install the new air temperature actuator and secure it with the mounting screws, tightening them to 1.6 N.m (14 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How do you install the new right hand temperature actuator for the 2004 Buick Rendezvous? Posted by Customer
    A:
    Place the new right hand temperature actuator in position and secure it with the mounting screws, tightening them to 1.6 N.m (14 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How should the left hand air temperature actuator be installed for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Place it back in position and secure it with the mounting screws, tightening them to 1.6 N.m (14 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be removed from the HVAC module next for the 2003 Buick Rendezvous? Posted by Customer
    A:
    The temperature door lever bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should the HVAC controls be set to for accessing the air temperature actuator for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Set the HVAC controls to the vent mode to position the defroster door lever.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the final step after securing the actuator for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Reconnect the electrical connector and reinstall the knee bolster to the IP.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How do you disengage the actuator linkage for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Rotate the actuator toward the steering column and then remove the actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the first step to replace the left air temperature actuator for the 2004 Chevrolet Venture? Posted by Customer
    A:
    First, remove the knee bolster and set the HVAC controls to the vent mode to position the defroster door lever for access.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How do you install the new right hand temperature actuator for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Position the new right hand temperature actuator and secure it with the mounting screws, tightening them to 1.6 N.m (14 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    How should the temperature door lever be installed for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Install the temperature door lever to the temperature door, ensuring the pin on the air temperature actuator aligns with the slot in the temperature door lever.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blend Door Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Actuator, Driver Side 10424941 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10424941 Actuator, Driver Side is available in the market under the name GM Blend Door Actuator. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10424941 Actuator, Driver Side fits certain Chevrolet Venture models, as well as Buick Rendezvous. Additionally, it is compatible with Pontiac Aztek, Montana and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 10424941 maintains top performance when functioning as the Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator unit at its Driver Side. The component 10424941 is constructed from durable material and its dimensions span 6.0 x 5.5 x 3.6 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Actuator, A/C Control. The part 10424941 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.