Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15908046
Wiper Arm, Rear

2002-2009 GM

Customer Questions & Expert Answers (17)
GM 15908046 Wiper Arm, Rear
GM 15908046 Wiper Arm, Rear
GM 15908046 Wiper Arm, Rear
GM 15908046 Wiper Arm, Rear
GM 15908046 Wiper Arm, Rear
  • Part Description
    Arm, Rear Window Wiper/Washer
  • Position
    Rear
  • Replaces
    15230587, 12494837, 15072167, 15135849, 15850966
  • Manufacturer
    General Motors
Make sure this part fits
$42.64 MSRP: $66.54
You Save: $23.90 (36%)
Ships in 1-2 Business Days
1
ADD TO CART
  • 2007 Chevy Trailblazer Wiper Arm, Rear Diagram for 15908046
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15908046

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15908046 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15908046 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the wiper arm on Chevrolet Trailblazer? Posted by Customer
    A:
    Before starting the Wiper Arm replacement process locate and record the blade position on the windshield through tape strips or pen marks. Unscrew the cover from the Wiper Arm nut to take off the nut. When the Wiper Arm fails to slide off from its position with simple rocking actions apply a battery terminal puller tool for help. When the Wiper Arm is loose unscrew it from the Drive Shaft and unmount the Wiper Arm blade from the Wiper Arm. Wash the Drive Shaft knurls with a wire brush. Fit the Wiper Blade onto the Wiper Arm before putting the Wiper Arm into position. Make sure the Wiper Arm blade lines up to the mark that you created previously on the windshield. Fit the Wiper Arm to the Drive Shaft then bolt it down using the nut until torque reaches 30 n.m (22 lb ft). Reinstall the cover to the nut followed by wiping marks and adhesive tape from the windshield before testing the wipers.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the windshield wiper arm on GMC Envoy? Posted by Customer
    A:
    You must take off the covering from the Wiper Arm nut and hold the Wiper Arm to remove the nut on a gmc envoy. Use a battery terminal puller instead when rocking does not make the Wiper Arm release from the Drive Shaft. Pressing the Wiper Arm pivot inward to unlock it from the shaft lets you take the Wiper Arm away and detach the Wiper Arm blade. Scrub away dirt from the Drive Shaft surfaces using a wire brush. First join the Wiper Arm blade to the Wiper Arm and insert the assembly onto the Drive Shaft. Install the nut over the Drive Shaft end and secure it to 30 n.m (22 lb ft) by holding the Wiper Arm blade against the windshield blackout dots. After placing the cover on top of the nut use the wipers to test if the system works correctly.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be removed after disconnecting the washer hose for the 2006 Buick Rainier? Posted by Customer
    A:
    Remove the wiper arm cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should you do after aligning the wiper arm blade for the 2006 Buick Rainier? Posted by Customer
    A:
    Secure the nut on the drive shaft, tightening it to 30 N.m (22 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What is the final step after securing the wiper arm for the 2005 Buick Rainier? Posted by Customer
    A:
    Replace the cover on the nut and operate the wipers to ensure proper function.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What do you do once the wiper arm is loosened for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Take off the wiper arm from the pivot shaft and detach the wiper arm blade from the wiper arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What is the first step to replace the rear wiper arm for the 2002 GMC Envoy? Posted by Customer
    A:
    Disconnect the washer hose and remove the wiper arm cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should you do after installing the wiper arm for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Replace the cover on the nut, clean any marks from the windshield, and operate the wipers to ensure proper function.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What is the first step to replace the rear window wiper arm for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Place the arm in the mid-wipe position on the rear glass and disconnect the washer hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How do you connect the washer hose for the 2005 GMC Envoy? Posted by Customer
    A:
    Install the washer hose end fitting, positioning the washer hose clockwise around the pivot shaft and connecting it to the elbow.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What is the first step to replace the rear wiper arm for the 2003 GMC Envoy? Posted by Customer
    A:
    Disconnect the washer hose and remove the wiper arm cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What is the first step for installation for the 2008 GMC Envoy? Posted by Customer
    A:
    Park the rear wiper motor and, if removed, install the wiper arm blade onto the wiper arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What if the wiper arm does not loosen from the drive shaft for the 2009 GMC Envoy? Posted by Customer
    A:
    Use a battery terminal puller.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should you do after removing the wiper arm for the 2007 GMC Envoy? Posted by Customer
    A:
    Take off the wiper arm blade and clean the knurls of the drive shaft with a wire brush.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How do you install the wiper arm onto the motor shaft for the 2007 GMC Envoy? Posted by Customer
    A:
    Install the wiper arm onto the motor shaft with the nut, holding the wiper arm in the park ramp while torquing the nut to 20 N.m (15 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should be done after removing the wiper arm cover for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    Take off the nut that secures the wiper arm to the motor shaft and then remove the wiper arm from the motor shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Wiper Arm, Rear 15908046 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15908046 Wiper Arm, Rear is available in the market under the name GM Wiper Arm. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15908046 Wiper Arm, Rear fits certain Chevrolet Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15908046 maintains top performance when functioning as the Arm, Rear Window Wiper/Washer unit at its Rear. The component 15908046 is constructed from durable material and its dimensions span 4.0 x 2.5 x 17.9 inches while weighing 0.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Rear Arm. The part 15908046 has available replacement options 15230587, 12494837, 15072167, 15135849, 15850966. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.