Make sure this part fits

GM 88957226
Outer CV Joint Boot

2004-2014 GM

Customer Questions & Expert Answers (15)
GM 88957226 Outer CV Joint Boot
  • Part Description
    Boot Kit, Front Axle; CV Boot
  • Position
    Front
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number88957226
    Part DescriptionBoot Kit, Front Axle; CV Boot
    Other NamesOuter Boot; Boot Kit, Front Wheel Drive Axle Shaft
    Item Dimensions7.9 x 7.8 x 5.4 inches
    Item Weight1.10 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU88957226
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2014 Cadillac CTSBase, Luxury, Performance, Premium, V6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    2005-2011 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 88957226 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88957226 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after installing the tripot spider assembly for the 2009 Cadillac CTS? Posted by Customer
    A:
    Install the retaining ring in the wheel drive shaft using the appropriate tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What tool is used to install the retaining ring in the wheel drive shaft for the 2010 Cadillac CTS? Posted by Customer
    A:
    The appropriate tool is used to install the retaining ring in the wheel drive shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What is the procedure for applying sealant to the grease cap cover for the 2008 Cadillac CTS? Posted by Customer
    A:
    Clean the grease cap with an alcohol-based solvent, then apply a 3 mm bead of sealant, GM P/N 88861422, on the inside diameter of the joint face assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What should be done with the boot clamps for the 2009 Cadillac CTS? Posted by Customer
    A:
    Discard the boot clamps.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What is the first step to replace the rear wheel drive shaft inner joint and boot for the 2009 Cadillac SRX? Posted by Customer
    A:
    First, remove the rear wheel drive shaft from the vehicle and secure it in a soft jawed vise, taking care not to cut through the inboard or outboard boot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What should be done to distribute the grease throughout the tripot spider bearings for the 2007 Cadillac SRX? Posted by Customer
    A:
    Rotate the inner tripot housing 4 or 5 times.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How should the balls be installed for the 2009 Cadillac SRX? Posted by Customer
    A:
    Install the balls sequentially, pressing down on the cage to access the ball tracks, ensuring no gap exists between the ball and inner race.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What should be done after removing the outer joint for the 2007 Cadillac SRX? Posted by Customer
    A:
    Discard the axle shaft retaining ring and seal, then clean all parts thoroughly with solvent and inspect for damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How should the boot be inspected for the 2010 Cadillac STS? Posted by Customer
    A:
    Check for proper shape and damage, reshaping if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How do you latch the large seal retaining clamp for the 2008 Cadillac STS? Posted by Customer
    A:
    Align the wheel drive shaft inboard seal, tripot housing, and large seal retaining clamp, then latch it using the Drive Axle Seal Clamp Pliers (J 35566), ensuring the tangs are fully engaged.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What is the final step in the process for the 2009 Cadillac STS? Posted by Customer
    A:
    Reinstall the wheel drive shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How should the cage be positioned for assembly for the 2010 Cadillac STS? Posted by Customer
    A:
    Position the cage with larger radius corners up.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What should be done if reusing the old tripot spider for the 2007 Cadillac STS? Posted by Customer
    A:
    Align the reference mark on it to the wheel drive shaft bar, ensuring the beveled edge faces the bar during reassembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What is the procedure for cleaning the cap for the 2010 Cadillac CTS? Posted by Customer
    A:
    Clean the cap with an alcohol-based solvent and apply a 3 mm (0.118 in) bead of sealant on the inside diameter of the CV joint face.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 88957226, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 88957226 Outer CV Joint Boot. It is sometimes referred to as GM CV Boot. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 88957226 Outer CV Joint Boot. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery