Make sure this part fits

GM 89022521
Condenser

2004-2011 GM

Customer Questions & Expert Answers (13)
GM 89022521 Condenser
  • Part Description
    Condenser, A/C; A/C Condenser
  • Replaces
    19130354
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    2005-2011 Cadillac STSBase, Platinum6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 89022521 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89022521 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after disconnecting the discharge line for the 2004 Cadillac SRX? Posted by Customer
    A:
    Remove the condenser tube bolt and disconnect the condenser tube from the condenser, discarding the O-ring as well.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Condenser
    Q:
    What should be done before removing the condenser for the 2005 Cadillac STS? Posted by Customer
    A:
    Recover the refrigerant and then raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Condenser
    Q:
    What is the first step to replace the condenser in a heavy-duty cooling system for the 2006 Cadillac STS? Posted by Customer
    A:
    Recover the refrigerant.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Condenser
    Q:
    What is the final step after reassembling the components for the 2005 Cadillac SRX? Posted by Customer
    A:
    Lower the vehicle, install the power steering cooler mounting bolts, and finally, evacuate and recharge the A/C system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Condenser
    Q:
    What is the procedure for installing the new condenser for the 2009 Cadillac SRX? Posted by Customer
    A:
    Install the new condenser and reposition the power steering cooler.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Condenser
    Q:
    What is the next step after removing the front air deflector for the 2008 Cadillac STS? Posted by Customer
    A:
    Take out the lower air baffle push pin retainers, followed by the condenser upper bracket bolts and the condenser lower mounting bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Condenser
    Q:
    What should be added to the new condenser before installation for the 2008 Cadillac SRX? Posted by Customer
    A:
    Add the specified amount of PAG oil directly to it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Condenser
    Q:
    What should be removed after raising for the 2006 Cadillac STS? Posted by Customer
    A:
    Remove the front air deflector retainers and the front air deflector, followed by the lower air baffle push pin retainers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Condenser
    Q:
    What should be done after disconnecting the discharge line from the condenser for the 2007 Cadillac SRX? Posted by Customer
    A:
    Discard the O-ring.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Condenser
    Q:
    What bolts need to be removed to take out the condenser for the 2007 Cadillac STS? Posted by Customer
    A:
    Remove the condenser upper bracket bolts, lower mounting bolts, discharge line bolt, and disconnect the discharge line from the condenser, discarding the O-ring.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Condenser
    Q:
    What is the torque specification for securing the condenser mounting bolts for the 2009 Cadillac STS? Posted by Customer
    A:
    Secure the condenser lower mounting bolts to 5.4 Nm (48 lb in) and the upper bracket bolts to the same torque.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Condenser
    Q:
    What is the torque specification for the condenser lower mounting bolts for the 2010 Cadillac STS? Posted by Customer
    A:
    Tighten to 5.4 Nm (48 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Condenser
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Condenser 89022521 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 89022521 Condenser is available in the market under the name GM A/C Condenser. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 89022521 Condenser fits certain Cadillac SRX, STS models.
The original GM component designated by manufacturer part number 89022521 maintains top performance when functioning as the Condenser, A/C; A/C Condenser unit. The component 89022521 is constructed from durable material and its dimensions span 9.5 x 34.7 x 25.5 inches while weighing 14.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Condenser, A/C Condenser. The part 89022521 has available replacement options 19130354. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.