Make sure this part fits

GM 19366714
Flex Hose, Rear Passenger Side

2004-2011 GM

Customer Questions & Expert Answers (14)
GM 19366714 Flex Hose, Rear Passenger Side
  • Part Description
    Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Rear Passenger Side
  • Replaces
    15875846, 25768199, 15244148, 15933092, 25767148
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    2005-2011 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19366714 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19366714 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done with the brake hose after removing it from the caliper for the 2007 Cadillac STS? Posted by Customer
    A:
    Tap the threaded end of the brake hose to caliper bolt on a shop towel to remove the gasket and discard the two copper brake hose gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the next step after stripping the coating for the 2007 Cadillac SRX? Posted by Customer
    A:
    Chamfer the inside and outside diameter of the pipe with the de-burring tool included in the J 45405.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What tools are needed for servicing and repairing brake pipes for the 2006 Cadillac SRX? Posted by Customer
    A:
    The J 45405 Brake Pipe Flaring Kit (J 45405).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done to the brake hose and brake pipe fittings before disconnecting for the 2005 Cadillac SRX? Posted by Customer
    A:
    Clean any dirt from them.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the final step after reattaching the wheel speed sensor wiring harness for the 2010 Cadillac STS? Posted by Customer
    A:
    Bleed the hydraulic brake system and reinstall the tire and wheel assembly before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after connecting the brake pipe fitting for the 2008 Cadillac STS? Posted by Customer
    A:
    Reattach the wheel speed sensor wiring harness retainers to the bracket, bleed the hydraulic brake system, install the tire and wheel assembly, and finally lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you remove the brake hose retainer for the 2004 Cadillac SRX? Posted by Customer
    A:
    Use a flat-bladed tool to remove it and take out the brake hose from the bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is important to use during installation for the 2007 Cadillac STS? Posted by Customer
    A:
    Ensure to use NEW copper brake hose gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be ensured during the installation of the intermediate brake hose assembly for the 2009 Cadillac SRX? Posted by Customer
    A:
    Ensure the brake hose is not twisted or kinked.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What needs to be cleaned before disconnecting the brake hose for the 2009 Cadillac STS? Posted by Customer
    A:
    Clean all dirt and foreign material from the brake hose and brake pipe fittings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you prepare the end of the pipe for flaring for the 2005 Cadillac STS? Posted by Customer
    A:
    Strip the nylon coating with the appropriate blade from the stripping tool and chamfer the pipe ends with the de-burring tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step in the installation process for the 2006 Cadillac STS? Posted by Customer
    A:
    Remove the rubber plug from the brake hose to caliper bolt hole.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after removing the brake hose from the crossover pipe for the 2008 Cadillac SRX? Posted by Customer
    A:
    Remove the brake hose from the frame assembly and the brake hose to caliper bolt from the brake caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Flex Hose, Rear Passenger Side 19366714 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19366714 Flex Hose, Rear Passenger Side is available in the market under the name GM Brake Line, Hydraulic Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19366714 Flex Hose, Rear Passenger Side fits certain Cadillac SRX, STS models.
The original GM component designated by manufacturer part number 19366714 maintains top performance when functioning as the Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line unit at its Rear Passenger Side. The component 19366714 is constructed from durable material and its dimensions span 7.4 x 2.1 x 13.1 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Hydraulic Brake. The part 19366714 has available replacement options 15875846, 25768199, 15244148, 15933092, 25767148. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.