Make sure this part fits

GM 19303841
Knuckle, Driver Side

2002-2009 GM

Customer Questions & Expert Answers (7)
GM 19303841 Knuckle, Driver Side
GM 19303841 Knuckle, Driver Side
  • Part Description
    Knuckle, Steering
  • Position
    Driver Side
  • Replaces
    18060689
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet SSRBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19303841 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19303841 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you remove the steering knuckle from the lower control arm for the 2007 Buick Rainier? Posted by Customer
    A:
    Discard the lower ball joint retaining nut and use the Ball Joint Remover (J 43631).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What tool is used to disconnect the steering knuckle from the lower control arm for the 2003 Chevrolet SSR? Posted by Customer
    A:
    The Ball Joint Remover (J43631).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What is the next step after installing the brake hose bracket for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Install the outer tie rod to the steering knuckle and tighten a new outer tie rod retaining nut to 60 Nm (44 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What should be done with the brake hose bracket during installation for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Reattach the brake hose bracket to the steering knuckle and secure it with the retaining bolts, tightening them to 10 Nm (89 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What should you do after lowering for the 2006 GMC Envoy? Posted by Customer
    A:
    Install the drive axle nut, tightening it to 140 Nm (103 ft. lbs.), and finally, adjust the front toe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What is the first step to replace the steering knuckle for the 2002 GMC Envoy? Posted by Customer
    A:
    Begin by removing the tire and wheel center cap, followed by the drive axle nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Knuckle, Driver Side 19303841 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19303841 Knuckle, Driver Side is available in the market under the name GM Steering Knuckle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19303841 Knuckle, Driver Side fits certain Chevrolet SSR, Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 19303841 maintains top performance when functioning as the Knuckle, Steering unit at its Driver Side. The component 19303841 is constructed from durable material and its dimensions span 20.6 x 11.8 x 3.1 inches while weighing 20.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 19303841 has available replacement options 18060689. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.