Make sure this part fits

GM 15918823
Stabilizer Link, Driver Side

2003-2009 GM

Customer Questions & Expert Answers (15)
GM 15918823 Stabilizer Link, Driver Side
  • Part Description
    Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
  • Position
    Driver Side
  • Replaces
    15187354, 15102674, 25809810
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet SSRBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2004-2009 Chevrolet TrailblazerBase, LS, LT, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2004-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15918823 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15918823 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    Why is it important not to damage the stabilizer shaft link boot for the 2007 Buick Rainier? Posted by Customer
    A:
    Any damage will lead to further issues.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    How do you secure the stabilizer shaft link to the stabilizer shaft for the 2006 Buick Rainier? Posted by Customer
    A:
    Connect it to the stabilizer shaft and secure it with the stabilizer shaft retaining nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be avoided when disconnecting the stabilizer shaft link from the frame for the 2006 Buick Rainier? Posted by Customer
    A:
    Do not pry on the link to avoid damaging the stabilizer shaft link boot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the first step to replace the rear stabilizer shaft link for the 2005 Buick Rainier? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be ensured during the installation for the 2005 Chevrolet SSR? Posted by Customer
    A:
    Follow the fastener notice for proper precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the next step after removing the retaining nuts for the 2006 Chevrolet SSR? Posted by Customer
    A:
    Disconnect the stabilizer shaft link from the frame and then from the stabilizer shaft before removing it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be done after removing the old stabilizer shaft link for the 2003 Chevrolet SSR? Posted by Customer
    A:
    Install the new stabilizer shaft link to the lower control arm and then to the stabilizer shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be done after installing the stabilizer shaft link nut for the 2009 GMC Envoy? Posted by Customer
    A:
    Tighten it to 23 Nm (17 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    How should the stabilizer shaft link retaining nuts be installed for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Install the stabilizer shaft link retaining nuts and tighten them to 90 Nm (66 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be removed to take out the stabilizer shaft link for the 2004 GMC Envoy? Posted by Customer
    A:
    Remove the upper nut (N/A) and lower nut (N/A) of the stabilizer shaft link.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What should be followed during installation for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    Follow the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the consequence of damaging the stabilizer shaft link boot for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Any damage will lead to further issues with the stabilizer shaft link.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the next step after securing the lower control arm retaining nut for the 2007 GMC Envoy? Posted by Customer
    A:
    Connect the stabilizer shaft link to the stabilizer shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    Q:
    What is the final step after tightening the nuts for the 2008 GMC Envoy? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Link
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Stabilizer Link, Driver Side 15918823 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15918823 Stabilizer Link, Driver Side is available in the market under the name GM Sway Bar Link. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15918823 Stabilizer Link, Driver Side fits certain Chevrolet SSR, Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15918823 maintains top performance when functioning as the Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link unit at its Driver Side. The component 15918823 is constructed from durable material and its dimensions span 6.3 x 3.1 x 3.2 inches while weighing 1.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Link. The part 15918823 has available replacement options 15187354, 15102674, 25809810. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.