GM 88957422
Fan Motor

Beginning the electric cooling Fan Motor replacement requires you to disconnect the cooling fan assembly. The first step involves removing the Fan Blade retaining nut attached to the motor as well as separating the Fan Blade from the motor shaft. To replace the motor start by removing its retaining screws then extract it from the shroud. Reset the motor within the shroud before securing the cooling Fan Motor retaining screws after tightening them to 5 nm (44 inch lbs.). Slowly drop the Fan Blade onto the rotating motor shaft by rotating the Fan Blade until it reaches the shaft position. Knot the Fan Blade retaining nut to the motor before tightening it to 7 nm (62 inch lbs.) then place back the cooling fan assembly.

The first step to replace the engine coolant Fan Motor begins with removing the cooling fan assembly. Before starting begin by removing the Fan Blade retaining nut from the motor followed by pulling the Fan Blade from the motor shaft. Start by removing the motor from the shroud after you have unscrewed its retaining screws. Installation requires a proper placement of the motor into the shroud followed by tightening the cooling Fan Motor retaining screws to 5 n.m (44 lb in). Seam the Fan Blade onto the motor shaft and rotate it until it drops onto position before installing and securing the Fan Blade retaining nut to 7 n.m (62 lb in). The cooling fan installation process concludes with the reinstallation of the fan assembly.

The replacement process for the engine coolant Fan Motor begins with unmounting the cooling fan assembly. You should start by taking off the Fan Blade retaining nut from the motor and then remove the Fan Blade from the motor shaft. Move on to the next step which involves opening the shroud by removing its motor retaining screws before extracting the motor. You should insert the motor inside the shroud before installing the cooling Fan Motor retaining screws using a torque of 5 n.m (44 lb in). The Fan Blade gets mounted to the motor shaft after rotating to drop onto position before tightening the Fan Blade retaining nut to 7 n.m (62 lb in). Put back the cooling fan assembly as the final installation step.

Remove the motor retaining screws and take the motor out of the shroud.

Position the motor back into the shroud, ensuring to follow the Fastener Notice.

Take out the cooling fan.

Position the motor back into the shroud and secure it with the cooling fan motor retaining screws, tightening them to 5 Nm (44 inch lbs.).

Attach the fan blade to the motor shaft, rotating the fan until it drops onto the shaft.

Unscrew the motor retaining screws and take the motor out of the shroud.

Reinstall the cooling fan and finally, put back the cooling fan shroud.

Begin by removing the cooling fan shroud.

Remove the motor retaining screws and detach the motor from the shroud.

Position the motor back into the shroud, ensuring to follow the Fastener Notice, and secure it with the cooling fan motor retaining screws, tightening them to 5 N.m (44 lb in).

Unscrew the motor retaining screws and detach the motor from the shroud.