Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 22807122
Resistor

2003-2007 GM

Customer Questions & Expert Answers (16)
GM 22807122 Resistor
GM 22807122 Resistor
GM 22807122 Resistor
GM 22807122 Resistor
GM 22807122 Resistor
GM 22807122 Resistor
  • Part Description
    Resistor, Air Conditioner Control; Blower Motor Resistor
  • Replaces
    89018597, 89019089
  • Manufacturer
    General Motors
Make sure this part fits
$55.46 MSRP: $113.98
You Save: $58.52 (52%)
Ships in 1 Business Day
1
ADD TO CART
  • 2004 Chevy Silverado 2500 HD Resistor Diagram for 22807122
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 22807122

  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2003-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2003-2006 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22807122 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22807122 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace a Blower Motor Resistor on Cadillac Escalade ESV? Posted by Customer
    A:
    Your first step when replacing the Blower Motor Resistor should be to take out the ip sound insulator unless it is present. Unplug the electrical wires from both the Blower Motor and the Blower Motor Resistor. Bring out the Blower Motor Resistor by removing its retaining screws. After putting the new Blower Motor Resistor in place you must fasten it with retaining screws. Torque the screws to 1.6 n.m (14 lb in) according to the fastener notice. Afterward reconnect the Blower Motor Resistor to its power supply and then to the Blower Motor. Reinstall the ip sound shield only if the vehicle has this part.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace an Auxiliary Blower Motor Resistor on Cadillac Escalade EXT? Posted by Customer
    A:
    Start replacing the auxiliary blower motor resistor by taking out the right rear quarter trim panel. Pull out the electrical connector from the blower motor resistor then unscrew its retaining screws. Move the blower motor resistor out of its position in the vehicle. Insert the blower motor resistor into its proper position and fasten it with two screws at 1.9 N.m (17 lb in) force following the Fastener Notice. Put back the right rear quarter trim panel by connecting its electrical interface to the blower motor resistor.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the blower motor resistor on Chevrolet Silverado 3500? Posted by Customer
    A:
    The first step to install the Blower Motor Resistor is to take out the ip sound insulator if present. Detach both electrical cables from the Blower Motor and from the Blower Motor Resistor. Unscrew and extract the Blower Motor Resistor's holding screws. Insert the new Blower Motor Resistor into place and make sure to follow all instructions mentioned in the service precautions fastener notice. Install the resistor using its retaining screws before twisting them to 1.6 n.m force. Reattach electrically both the motor resistor and the Blower Motor unit. Reinstall the ip sound insulator last when it is present.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the blower motor resistor on Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    First step for replacing the Blower Motor Resistor is to take out the ip sound insulator if your vehicle has it installed. Take off the Blower Motor Resistor by deleting its electrical connections then removing the retaining screws. Fit the replacement Blower Motor Resistor into its designated space and bolt it with screws at 1.6 n.m (14 lb in). Connect the electrical cable first to the Blower Motor Resistor and then to the Blower Motor. After replacing the parts put the ip sound insulator back in position.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the blower motor resistor on Chevrolet Silverado 2500? Posted by Customer
    A:
    The first step to install the Blower Motor Resistor is to take out the ip sound insulator if present. Detach both electrical cables from the Blower Motor and from the Blower Motor Resistor. Unscrew and extract the Blower Motor Resistor's holding screws. Insert the new Blower Motor Resistor into place and make sure to follow all instructions mentioned in the service precautions fastener notice. Install the resistor using its retaining screws before twisting them to 1.6 n.m force. Reattach electrically both the motor resistor and the Blower Motor unit. Reinstall the ip sound insulator last when it is present.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace a Blower Motor Resistor on GMC Yukon? Posted by Customer
    A:
    Your first step when replacing the Blower Motor Resistor should be to take out the ip sound insulator unless it is present. Unplug the electrical wires from both the Blower Motor and the Blower Motor Resistor. Bring out the Blower Motor Resistor by removing its retaining screws. After putting the new Blower Motor Resistor in place you must fasten it with retaining screws. Torque the screws to 1.6 n.m (14 lb in) according to the fastener notice. Afterward reconnect the Blower Motor Resistor to its power supply and then to the Blower Motor. Reinstall the ip sound shield only if the vehicle has this part.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you install the new blower motor resistor for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Place the new blower motor resistor in position and secure it with the retaining screws, tightening them to 1.6 N.m (14 lb in) as noted in the Fastener Notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Motor Resistor
    Q:
    What should be done after installing the new blower motor resistor for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Reconnect the electrical connection to the blower motor resistor followed by the connection to the blower motor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Motor Resistor
    Q:
    What is the final step if it is equipped with it for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Reinstall the IP sound insulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Motor Resistor
    Q:
    What is the first step to replace the blower motor resistor for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Remove the IP sound insulator if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Motor Resistor
    Q:
    What is the final step if it is equipped with an IP sound insulator for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Reinstall the IP sound insulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Motor Resistor
    Q:
    What is the next step after disconnecting the electrical connections for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the retaining screws for the blower motor resistor and take out the resistor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Motor Resistor
    Q:
    How should the new blower motor resistor be secured for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Secure the resistor with the retaining screws, tightening them to 1.6 N.m (14 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Motor Resistor
    Q:
    How should the new blower motor resistor be secured for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Secure the resistor with the retaining screws, tightening them to 1.6 N.m (14 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Motor Resistor
    Q:
    What should be done after installing the new blower motor resistor for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Reconnect the electrical connection to the blower motor resistor followed by the connection to the blower motor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Motor Resistor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Resistor 22807122 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22807122 Resistor is available in the market under the name GM Blower Motor Resistor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22807122 Resistor fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 22807122 maintains top performance when functioning as the Resistor, Air Conditioner Control; Blower Motor Resistor unit. The component 22807122 is constructed from durable material and its dimensions span 6.5 x 4.3 x 4.3 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Resistor, A/C Control. The part 22807122 has available replacement options 89018597, 89019089. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.