How to replace the Hydraulic Hose for the Clutch on 2007 Cadillac CTS?

To replace the hydraulic Clutch Hose/pipe (CTS) do the following, first, remove the bolts of the surge tank and move the tank to a side.note: take care that the shift cable manual does not come off while working on the hose; it should remain within the surge tank area. Next remove the clutch Hydraulic Hose retaining clip off the Clutch Master Cylinder and install a cap or plug to the exposed hose and Clutch Master Cylinder fittings to reduce the likely hood of fluid draining out of the hydraulics and contamination. Remove the clutch Hydraulic Hose from the Clutch Master Cylinder and lift up and support the vehicle. Remove the clutch Hydraulic Hose retaining clip from the Clutch Slave Cylinder and remove the clutch Hydraulic Hose from the Clutch Slave Cylinder, noticing the need to not plug the lower hose end or slave cylinder fitting due to the presence of check valves that will create only a small amount of fluid loss. Remove the clutch Hydraulic Hose from the car. For installation, on installing the retaining clip for clutch Hydraulic Hose into the position of the Clutch Slave Cylinder, the hose should be raised upwards above the Clutch Slave Cylinder having light bends, kinks, and a loop downwards and likewise should not be touching any sharp having looming heat potential. Install the clutch Hydraulic Hose on the vehicle with the locating tab into the notch of the slave cylinder hose fitting, push the hose into the Clutch Slave Cylinder, with a "click" heard. Gently pull on the hose ensuring retention then pull the vehicle down. Secure the clutch Hydraulic Hose retaining clip to the Clutch Master Cylinder and attach the clutch Hydraulic Hose to the Clutch Master Cylinder and pushing it in until hearing a "click" and again very gentle tugging since it ensures a proper retention. Lastly bleed the clutch hydraulic system and place the coolant surge tank in a correct position before installing surge tank bolts.

OEM 2007 Cadillac CTS Hydraulic Hose

Brake Hydraulic Line

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Hydraulic Hoses found

View related parts
2007 Cadillac CTS Power Steering Return Hose Part Number: 21997868
$16.29 MSRP: $26.67
You Save: $10.38 (39%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Power Steering Fluid Reservoir Outlet; Power Steering Hose; Reservoir Hose; Hose, Steering Gear Oil Return
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 2.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 21997868
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac CTS Submodels:
- V | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View related parts
2007 Cadillac CTS Power Steering Return Hose Part Number: 25768050
$27.09 MSRP: $33.23
You Save: $6.14 (19%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Power Steering Fluid Reservoir Outlet; Power Steering Hose; Reservoir Hose; Hose, Steering Gear Oil Return
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.5 x 3.1 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25768050
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac CTS Submodels:
- Base | 6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS
View related parts
2007 Cadillac CTS Flex Hose, Front Part Number: 19256891
$22.77 MSRP: $42.76
You Save: $19.99 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Kit, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose Kit, Hydraulic Brake
- Position: Front
- Replaces: 15933097, 15875854
- Item Weight: 1.00 Pounds
- Item Dimensions: 8.2 x 7.7 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19256891
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View related parts
2007 Cadillac CTS Flex Hose, Front Passenger Side Part Number: 19256888
$22.77 MSRP: $42.76
You Save: $19.99 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Kit, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose Kit, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 15875853, 15933096
- Item Weight: 1.00 Pounds
- Item Dimensions: 12.5 x 8.2 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19256888
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View related parts
2007 Cadillac CTS Flex Hose Part Number: 15875847
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear
- Replaces: 25768193
- Item Weight: 1.10 Pounds
- Item Dimensions: 15.4 x 6.7 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15875847
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac CTS Submodels:
- V | 8 Cyl 6.0 L GAS
View related parts
2007 Cadillac CTS Power Steering Return Hose Part Number: 25773286
Product Specifications
- Other Name: Hose, Steering Gear Oil Return; Power Steering Hose; Upper Return Hose
- Item Weight: 0.60 Pounds
- Item Dimensions: 13.9 x 8.8 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25773286
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac CTS Submodels:
- Base | 6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS
View related parts
2007 Cadillac CTS Power Steering Pressure Hose Part Number: 25768048
Product Specifications
- Other Name: Hose, Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Item Weight: 1.90 Pounds
- Item Dimensions: 8.2 x 5.3 x 11.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25768048
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac CTS Submodels:
- Base | 6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS
View related parts
2007 Cadillac CTS Power Steering Pressure Hose Part Number: 89060184
Product Specifications
- Other Name: Hose, Steering Gear Oil Pressure; Power Steering Hose; Pressure Hose
- Item Weight: 1.80 Pounds
- Item Dimensions: 26.8 x 15.3 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89060184
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac CTS Submodels:
- V | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View related parts
2007 Cadillac CTS Flex Hose, Rear Part Number: 19366715
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 15933093, 19331546, 15257487, 15875848
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.4 x 2.1 x 13.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366715
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Cadillac CTS Power Steering Return Hose Part Number: 15145899
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Outlet; Power Steering Hose; Lower Return Hose; Hose, Steering Gear Oil Return
- Item Weight: 0.80 Pounds
- Item Dimensions: 27.8 x 6.2 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15145899
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac CTS Submodels:
- V | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View related parts
2007 Cadillac CTS Flex Hose, Rear Part Number: 19366713
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 15244147, 15933091, 25767147, 15875845
- Item Weight: 0.60 Pounds
- Item Dimensions: 15.9 x 2.0 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366713
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View related parts
2007 Cadillac CTS Power Steering Return Hose Part Number: 15145898
Product Specifications
- Other Name: Hose Assembly-Power Steering Fluid Reservoir Inlet; Power Steering Hose; Upper Return Hose; Hose, Steering Gear Oil Return
- Item Weight: 0.70 Pounds
- Item Dimensions: 17.7 x 11.5 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15145898
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac CTS Submodels:
- V | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View related parts
2007 Cadillac CTS Power Steering Return Hose Part Number: 25743804
Product Specifications
- Other Name: Hose, Power Steering Gear Outlet; Power Steering Hose; Lower Return Hose; Hose, Steering Gear Oil Return
- Item Weight: 0.60 Pounds
- Item Dimensions: 17.0 x 4.6 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25743804
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac CTS Submodels:
- Base | 6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS

2007 Cadillac CTS Hydraulic Hose

With a comprehensive array of OEM 2007 Cadillac CTS Hydraulic Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac CTS Hydraulic Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Cadillac CTS Hydraulic Hose Parts and Q&A

Q: How to replace the Hydraulic Hose for the Clutch on 2007 Cadillac CTS?
A: To replace the hydraulic Clutch Hose/pipe (CTS) do the following, first, remove the bolts of the surge tank and move the tank to a side.note: take care that the shift cable manual does not come off while working on the hose; it should remain within the surge tank area. Next remove the clutch Hydraulic Hose retaining clip off the Clutch Master Cylinder and install a cap or plug to the exposed hose and Clutch Master Cylinder fittings to reduce the likely hood of fluid draining out of the hydraulics and contamination. Remove the clutch Hydraulic Hose from the Clutch Master Cylinder and lift up and support the vehicle. Remove the clutch Hydraulic Hose retaining clip from the Clutch Slave Cylinder and remove the clutch Hydraulic Hose from the Clutch Slave Cylinder, noticing the need to not plug the lower hose end or slave cylinder fitting due to the presence of check valves that will create only a small amount of fluid loss. Remove the clutch Hydraulic Hose from the car. For installation, on installing the retaining clip for clutch Hydraulic Hose into the position of the Clutch Slave Cylinder, the hose should be raised upwards above the Clutch Slave Cylinder having light bends, kinks, and a loop downwards and likewise should not be touching any sharp having looming heat potential. Install the clutch Hydraulic Hose on the vehicle with the locating tab into the notch of the slave cylinder hose fitting, push the hose into the Clutch Slave Cylinder, with a "click" heard. Gently pull on the hose ensuring retention then pull the vehicle down. Secure the clutch Hydraulic Hose retaining clip to the Clutch Master Cylinder and attach the clutch Hydraulic Hose to the Clutch Master Cylinder and pushing it in until hearing a "click" and again very gentle tugging since it ensures a proper retention. Lastly bleed the clutch hydraulic system and place the coolant surge tank in a correct position before installing surge tank bolts.