How to properly service and repair the EGR Tube on Chevrolet Equinox?

The first step to replace the exhaust gas recirculation (EGR) pipe requires removal of the injector sight shield. Start by unscrewing the bolt which maintains the egr pipe to the EGR Valve . After that, remove the 2 bolts attaching the egr pipe to the Exhaust Manifold before taking out the egr pipe plus its gasket. To install the new pipe start by putting the Exhaust Manifold gasket against the egr pipe and then fasten the pipe with its 2 bolts at 10 n.m (89 lb in). Begin by installing the bolt to bind the egr pipe to the EGR Valve followed by bolt torquing to 30 n.m (22 lb ft). Completion of the installation requires putting back the injector sight shield.

How to service the EGR Tube on Chevrolet Impala?

Service of the EGR Tube requires a stepwise process starting with engine ignition shutdown. Start by removing the bolt which maintains the pipe assembly on the EGR Valve before gently extracting the pipe assembly backward. Begin the service procedure by unscrewing the egr pipe assembly nut while it is attached to the Exhaust Manifold before removing the egr pipe. The installation begins with attaching the EGR Valve pipe to the Exhaust Manifold before torquing the egr pipe nut to 25 n.m (18 lb ft). Proceed with connecting the EGR Valve pipe bolt to the EGR Valve while tightening it to 25 n.m (18 lb ft).

How to properly service and repair the EGR Tube on Chevrolet Malibu?

First turn off ignition before starting the repair of the exhaust gas recirculation (EGR) pipe. The bolt securing the EGR Valve pipe assembly needs removal before pulling the pipe assembly slowly from its position. Nicr adjust the Exhaust Manifold egr pipe assembly nut and extract the egr pipe from its position. Start by attaching the EGR Valve pipe to the Exhaust Manifold through proper torquing of the egr pipe nut to 25 n.m (18 lb ft). The EGR Valve requires installation of its bolt and subsequent tightening to 25 n.m (18 lb ft).

OEM Chevrolet EGR Tube

EGR Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

38 EGR Tubes found

View related parts
Chevrolet Inlet Pipe
Part Number: 55514990
$36.03 MSRP: $64.34
You Save: $28.31 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Emission System
- Replaces: 55490626
Fits the following Chevrolet Models:
- Suburban | 2021-2023 | High Country, LS, LT, Premier, RST | 6 Cyl 3.0 L DIESEL
- Tahoe | 2021-2023 | High Country, LS, LT, Premier, RST | 6 Cyl 3.0 L DIESEL
View related parts
Chevrolet EGR Pipe
Part Number: 12680217
$87.17 MSRP: $163.70
You Save: $76.53 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-EGR; EGR Tube; Pipe
- Replaced by: 12688016
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2017-2024 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
- Silverado 3500 HD | 2017-2024 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet EGR Valve
Part Number: 89018176
$208.72 MSRP: $374.38
You Save: $165.66 (45%)
Product Specifications
- Other Name: Valve Kit, EGR; EGR Pipe
- Replaces: 12588470
Fits the following Chevrolet Models:
- Equinox | 2005-2006 | LS, LT | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Tube
Part Number: 24575928
Product Specifications
- Other Name: Pipe Assembly-EGR Valve; EGR Tube; Pipe, Emission System
Fits the following Chevrolet Models:
- S10 | 1998 | Base, LS | 4 Cyl 2.2 L GAS
View related parts
Chevrolet EGR Tube
Part Number: 24506775
Product Specifications
- Other Name: Pipe, Emission System; EGR Pipe; Tube; Pipe
Fits the following Chevrolet Models:
- Beretta | 1996 | Base, Z26 | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
- Lumina | 1996-1999 | Base, LS, LTZ | 6 Cyl 3.1 L GAS
- Malibu | 1997-1999 | Base, LS | 6 Cyl 3.1 L GAS
- Monte Carlo | 1996-1999 | LS | 6 Cyl 3.1 L GAS
- Venture | 1997-1999 | Base, LS | 6 Cyl 3.4 L GAS
View More
View related parts
Chevrolet Tube
Part Number: 12557662
Product Specifications
- Other Name: Pipe Assembly-EGR Valve Inlet; EGR Tube; Pipe, Emission System
Fits the following Chevrolet Models:
- Silverado 1500 | 1999-2002 | Base, LS, LT, WT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet EGR Tube
Part Number: 10100090
Product Specifications
- Other Name: Adapter, Emission System; Tube; Tube, Emission System
Fits the following Chevrolet Models:
- Beretta | 1990-1993 | Base, GT, GTZ, Indianapolis 500 Pace Car | 6 Cyl 3.1 L GAS
- Lumina | 1990-1994 | Base, Euro | 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Outlet Pipe
Part Number: 55515558
$47.24 MSRP: $84.36
You Save: $37.12 (44%)
Product Specifications
- Other Name: Pipe Assembly, Emission System; EGR Tube; Pipe
- Replaced by: 24000368
- Replaces: 55514992, 55511567
Fits the following Chevrolet Models:
- Silverado 1500 | 2020-2023 | Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST | 6 Cyl 3.0 L DIESEL
- Suburban | 2021-2023 | High Country, LS, LT, Premier, RST | 6 Cyl 3.0 L DIESEL
- Tahoe | 2021-2023 | High Country, LS, LT, Premier, RST | 6 Cyl 3.0 L DIESEL
View More
View related parts
Chevrolet Tube
Part Number: 24575433
Product Specifications
- Other Name: Pipe; EGR Tube; Pipe, Emission System
Fits the following Chevrolet Models:
- Cavalier | 1998 | Base, LS, RS | 4 Cyl 2.2 L GAS
View related parts
Chevrolet EGR Pipe
Part Number: 24508445
Product Specifications
- Other Name: Pipe, Emission System; EGR Tube; Tube; Pipe
Fits the following Chevrolet Models:
- Camaro | 2000-2002 | Base | 6 Cyl 3.8 L GAS
View related parts
Chevrolet EGR Pipe
Part Number: 10217283
Product Specifications
- Other Name: Pipe Assembly-EGR Valve; EGR Tube; Tube; Pipe; Pipe, Emission System
Fits the following Chevrolet Models:
- Camaro | 1993-1995 | Base | 6 Cyl 3.4 L GAS
View related parts
Chevrolet EGR Pipe
Part Number: 91174522
Product Specifications
- Other Name: EGR Tube; Tube
Fits the following Chevrolet Models:
- Tracker | 1999-2000 | Base, LSi | 4 Cyl 1.6 L GAS
View related parts
Chevrolet EGR Pipe
Part Number: 12556643
Product Specifications
- Other Name: Pipe Assembly-EGR Valve; EGR Tube; Tube; Pipe; Pipe, Emission System
Fits the following Chevrolet Models:
- Camaro | 1998-1999 | Z28, Z28 SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet EGR Pipe
Part Number: 12551318
Product Specifications
- Other Name: Pipe Assembly-EGR Valve; EGR Tube; Tube; Pipe; Pipe, Emission System
Fits the following Chevrolet Models:
- Camaro | 1993-1997 | Indianapolis 500 Pace Car, Z28 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet EGR Pipe
Part Number: 24574464
Product Specifications
- Other Name: Pipe, Emission System; EGR Tube; Tube
Fits the following Chevrolet Models:
- Cavalier | 1996-1998 | LS, Z24 | 4 Cyl 2.4 L GAS
- Malibu | 1997-1999 | Base | 4 Cyl 2.4 L GAS
View related parts
Chevrolet EGR Pipe
Part Number: 24506482
Product Specifications
- Other Name: Pipe, Emission System; EGR Tube; Tube; Pipe
Fits the following Chevrolet Models:
- Camaro | 1995-1999 | Base, RS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet EGR Tube
Part Number: 10228904
Product Specifications
- Other Name: Pipe Assembly-EGR Valve; EGR Pipe; Tube; Pipe, Emission System
Fits the following Chevrolet Models:
- Beretta | 1994-1995 | Base, Z26 | 6 Cyl 3.1 L GAS
- Lumina | 1995 | Base, LS | 6 Cyl 3.1 L GAS
- Monte Carlo | 1995 | LS | 6 Cyl 3.1 L GAS
View More
View related parts
Chevrolet Tube
Part Number: 17113122
Product Specifications
- Other Name: Pipe, Emission System; EGR Tube
Fits the following Chevrolet Models:
- S10 | 1995-1997 | Base, LS | 4 Cyl 2.2 L GAS
View related parts
Chevrolet EGR Pipe
Part Number: 91174521
Product Specifications
- Other Name: Pipe, EGR (On Esn); EGR Tube; Tube; Pipe, Emission System
Fits the following Chevrolet Models:
- Tracker | 1999-2001 | Base, LSi, LT, ZR2 | 4 Cyl 2.0 L GAS
View related parts
Chevrolet EGR Pipe
Part Number: 91176188
Product Specifications
- Other Name: Pipe, Emission System; EGR Tube; Tube
Fits the following Chevrolet Models:
- Tracker | 2001-2003 | Base, LT, ZR2 | 4 Cyl 2.0 L GAS

| Page 1 of 2 |Next >

1-20 of 38 Results

Chevrolet EGR Tube Parts Questions & Experts Answers

EGR Valve
89018176
Q: How to properly service and repair the EGR Tube on Chevrolet Equinox?
A: The first step to replace the exhaust gas recirculation (EGR) pipe requires removal of the injector sight shield. Start by unscrewing the bolt which maintains the egr pipe to the EGR Valve . After that, remove the 2 bolts attaching the egr pipe to the Exhaust Manifold before taking out the egr pipe plus its gasket. To install the new pipe start by putting the Exhaust Manifold gasket against the egr pipe and then fasten the pipe with its 2 bolts at 10 n.m (89 lb in). Begin by installing the bolt to bind the egr pipe to the EGR Valve followed by bolt torquing to 30 n.m (22 lb ft). Completion of the installation requires putting back the injector sight shield.
EGR Pipe
24508516
Q: How to service the EGR Tube on Chevrolet Impala?
A: Service of the EGR Tube requires a stepwise process starting with engine ignition shutdown. Start by removing the bolt which maintains the pipe assembly on the EGR Valve before gently extracting the pipe assembly backward. Begin the service procedure by unscrewing the egr pipe assembly nut while it is attached to the Exhaust Manifold before removing the egr pipe. The installation begins with attaching the EGR Valve pipe to the Exhaust Manifold before torquing the egr pipe nut to 25 n.m (18 lb ft). Proceed with connecting the EGR Valve pipe bolt to the EGR Valve while tightening it to 25 n.m (18 lb ft).
EGR Tube
24508969
Q: How to properly service and repair the EGR Tube on Chevrolet Malibu?
A: First turn off ignition before starting the repair of the exhaust gas recirculation (EGR) pipe. The bolt securing the EGR Valve pipe assembly needs removal before pulling the pipe assembly slowly from its position. Nicr adjust the Exhaust Manifold egr pipe assembly nut and extract the egr pipe from its position. Start by attaching the EGR Valve pipe to the Exhaust Manifold through proper torquing of the egr pipe nut to 25 n.m (18 lb ft). The EGR Valve requires installation of its bolt and subsequent tightening to 25 n.m (18 lb ft).