Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2006-2013 Chevrolet Impala | LS, LT, LTZ, Police, SS | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 8 Cyl 5.3 L GAS
Chevrolet Impala A/C Condenser
Our website offers an extensive catalog of genuine Chevrolet Impala A/C Condenser at unbeatable prices. Every OEM Chevrolet Impala A/C Condenser comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Impala A/C Condenser Parts Questions & Experts Answers
Q: How to replace the A/C Condenser in the HVAC system on Chevrolet Impala?
A: A replacement process starts with recovering refrigerants from hvac systems. The removal begins with taking out both the Radiator and the a/c line coupling from the condenser tube to the evaporator tube. After detaching the a/c compressor line nut from the condenser you must set the a/c compressor line aside before removing the condenser from your vehicle. The technician must eliminate the o-ring seals together with the seal washer. Before installing a new condenser in your vehicle you must add refrigerant oil to it. The installation process requires a replacement seal washer on the a/c compressor hose and fresh o-ring seals for the evaporator tube. After reinstalling the Radiator the mechanic attaches the evaporator tube to the condenser while installing the a/c line coupling to both components. When torquing the a/c line nut attach the a/c compressor hose to the condenser while holding the A/C Condenser block fitting with a 20mm wrench or pliers to prevent hose twisting. Torque the a/c compressor hose block fitting nut to reach 17 n.m (12.5 lb ft). Evacuate and recharge the a/c system before conducting a halogen leak detector (J 39400-A) test on its fittings.