Other Name: Cable Assembly-Accelerator Control; Cable, Accelerator Control
Fits the following GMC Models:
C1500 | 1991-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
C1500 Suburban | 1992-1995 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
C2500 | 1991-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
C2500 Suburban | 1992-1995 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
C3500 | 1991-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
K1500 | 1991-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
K1500 Suburban | 1992-1995 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
K2500 | 1991-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
K2500 Suburban | 1992-1995 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
K3500 | 1991-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
S15 Jimmy | 1984-1990 | Base, Gypsy, High Sierra, Sierra Classic, Timberline | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
Q: How to Change the Throttle Cable on a GMC Safari?
A: The first step in changing the accelerator controls cable requires engine cover removal and air cleaner outlet duct removal. First detach the accelerator cable from the throttle lever before detaching it from the engine cable bracket and then remove the accelerator cable from the accelerator pedal to separate the bulkhead from its assembly. Begin the installation process by mounting the accelerator cable to the bulkhead while expanding all locking tabs to maintain cable connection to the dash panel. Also check that the dash panel insulator stays separated from the cable. You must attach the accelerator cable to the accelerator pedal while ensuring the retainer sits properly in its position. Attach the accelerator cable to the engine cable bracket followed by the throttle lever connection. As the last step reinstall the air cleaner outlet duct and the engine cover.
Q: How to replace the throttle cable on GMC Savana 3500?
A: You must dismantle the engine cover followed by the air cleaner outlet duct to replace the accelerator controls cable. The accelerator cable needs to be separated from its connections at the throttle lever as well as engine cable bracket and accelerator pedal before the dash panel removal. Begin installation by mounting the accelerator cable to both the dash panel and then connecting it to the accelerator pedal. Complete the installation by joining the cable to both the engine cable bracket and throttle lever then put back the air cleaner outlet duct and engine cover.
Q: How to replace the throttle cable on GMC Savana 2500?
A: The first step to replace the accelerator controls cable involves removing the engine cover then the air cleaner outlet resonator. The accelerator cable has to be disconnected from its points of attachment to the throttle lever, engine cable bracket, accelerator pedal and bulkhead . Start by affixing the bulkhead with the accelerator cable followed by attaching it to the pedal before securing the engine cable bracket and ending with the throttle lever. After finishing install the air cleaner outlet resonator before reinstalling the engine cover.