Make sure this part fits

GM 20869232
Lower Control Arm, Driver Side

2003-2024 GM

Customer Questions & Expert Answers (14)
GM 20869232 Lower Control Arm, Driver Side
  • Part Description
    Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
  • Position
    Driver Side
  • Replaces
    15750832
  • Manufacturer
    General Motors
Make sure this part fits
$178.77 MSRP: $307.04
You Save: $128.27 (42%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2024 Chevrolet Express 2500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    2003-2024 Chevrolet Express 3500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    2006-2014 GMC Savana 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2024 GMC Savana 2500Base, LS, LT, SLE4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    2003-2024 GMC Savana 3500Base, LS, LT, SLE4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 20869232 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 20869232 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the lower control arm on a rear-wheel drive for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    First raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the lower control arm for the 2010 Chevrolet Express 3500? Posted by Customer
    A:
    First, raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What are the final steps after completing the installation for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Install the tire and wheel, remove the safety stands, lower the vehicle, and check the wheel alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you disconnect the lower ball joint from the steering knuckle for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    Use the J 43631 Ball Joint Remover and J 45851 Ball Joint Separator Protector Adapters.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the final step after reinstalling the components for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Lower the vehicle and check the wheel alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What components need to be removed next for the 2007 GMC Savana 2500? Posted by Customer
    A:
    Remove the retaining bolts for the brake hose and the wheel speed sensor brackets, followed by the wheel drive shaft (4WD only).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you connect the upper control arm to the steering knuckle for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Connect the upper control arm to the steering knuckle, then install the new upper ball joint retaining nut and tighten it to 50 Nm (37 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the next step after detaching the lower ball joint for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Remove the lower control arm nuts, washers, and bolts, then take out the lower control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What components need to be reinstalled after the lower control arm for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Reinstall the shock absorber in the lower control arm, followed by the wheel drive shaft, stabilizer link, and torsion bar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What are the final steps after installation for the 2007 GMC Savana 2500? Posted by Customer
    A:
    Reinstall the front coil spring, the tire and wheel, lower the vehicle, and check the wheel alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you disconnect the upper control arm from the steering knuckle for the 2006 GMC Savana 3500? Posted by Customer
    A:
    Remove the upper ball joint retaining nut and use the J 43631 (Ball Joint Remover) and J 45851 (Ball Joint Separator Protector Adapters).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the upper control arm for the 2010 GMC Savana 3500? Posted by Customer
    A:
    First, raise and support the vehicle and support the lower control arm with a jack stand.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the upper control arm for the 2009 GMC Savana 2500? Posted by Customer
    A:
    First, raise and support the vehicle and support the lower control arm with a jack stand.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lower Control Arm, Driver Side 20869232 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 20869232 Lower Control Arm, Driver Side is available in the market under the name GM Control Arm. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 20869232 Lower Control Arm, Driver Side fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 20869232 maintains top performance when functioning as the Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly. unit at its Driver Side. The component 20869232 is constructed from durable material and its dimensions span 5.3 x 23.7 x 16.6 inches while weighing 36.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 20869232 has available replacement options 15750832. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.