Make sure this part fits

GM 12477825
Upper Hinge, Driver Side

2000-2004 GM

Customer Questions & Expert Answers (11)
GM 12477825 Upper Hinge, Driver Side
  • Part Description
    Hinge Kit, Door Hinge
  • Position
    Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2004 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2004 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2000-2004 Chevrolet Suburban 1500Base, LS, LT, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2000-2004 Chevrolet Suburban 2500Base, LS, LT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2000-2004 Chevrolet TahoeBase, LS, LT, Z718 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2000-2004 GMC YukonDenali, SLE, SLT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2004 GMC Yukon XL 1500Denali, SLE, SLT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2004 GMC Yukon XL 2500SLE, SLT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12477825 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12477825 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How is the stud installed for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Feed fish wire through the hinge, the hinge stud hole, and out of the conduit hole in the pillar, then install the stud into the wire end and pull it into position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the existing hinge be prepared for removal for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Lightly hand-sand the existing hinge with 100 grit or finer sandpaper to locate the four welds attaching the hinge to the door, and punch the center of each weld.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you secure the hinge and backing plate for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Align the hinge and backing plate with the holes in the door, install the bolts, and tighten them to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the process for positioning the service hinge for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Position the service hinge within the scribe marks on the door and center punch each hole location according to the service hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done if the hinge does not separate easily from the door for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Use a chisel to separate the hinge from the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after installing each stud for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Draw the stud tight through the pillar using the supplied nuts and repeat for the remaining stud locations.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after installing the studs for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Remove each service nut, apply a full-bodied caulk to the hinge mounting surface, install the hinge to the pillar using the supplied nuts, and tighten the hinge nuts to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you locate the welds attaching the hinge to the pillar for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Lightly hand-sand the existing hinge with 100 grit or finer sandpaper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How is the stud installed for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Feed fish wire through the hinge, the hinge stud hole, and out of the conduit hole in the pillar, then install the stud into the wire end and pull it into position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after removing the hinge for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Clear all remaining weld from the pillar surface for a flush fit of the service hinge and repair any damage to the pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Upper Hinge, Driver Side 12477825 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12477825 Upper Hinge, Driver Side is available in the market under the name GM Door Hinge. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12477825 Upper Hinge, Driver Side fits certain Chevrolet Tahoe, Suburban 1500, Suburban 2500 models, as well as GMC Yukon, Yukon XL 1500, Yukon XL 2500. Additionally, it is compatible with Cadillac Escalade, Escalade ESV models.
The original GM component designated by manufacturer part number 12477825 maintains top performance when functioning as the Hinge Kit, Door Hinge unit at its Driver Side. The component 12477825 is constructed from durable material and its dimensions span 6.8 x 6.6 x 4.6 inches while weighing 3.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hinge; Door Hinge. The part 12477825 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.