Make sure this part fits

GM 25757865
Overflow Hose

2003-2010 GM

Customer Questions & Expert Answers (19)
GM 25757865 Overflow Hose
  • Part Description
    Hose, Radiator Surge Tank Overflow; Coolant Reservoir Hose; Multi Purpose Hose; Radiator Hose
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Cadillac CTSBase, Luxury, Luxury Sport, V6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    2005-2010 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25757865 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25757865 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be removed after raising for the 2007 Cadillac STS? Posted by Customer
    A:
    Remove the coolant pipe to generator bracket bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the first step for installation of the surge tank outlet hose/pipe for the 2005 Cadillac STS? Posted by Customer
    A:
    Position the surge tank outlet hose/pipe back into the engine compartment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the final step after reconnecting the radiator inlet hose for the 2007 Cadillac CTS? Posted by Customer
    A:
    Fill the cooling system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    How do you remove the surge tank outlet hose from the surge tank for the 2003 Cadillac CTS? Posted by Customer
    A:
    Use the Hose Clamp Pliers (J 38185) to remove the surge tank outlet hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What needs to be removed after the surge tank outlet hose for the 2004 Cadillac CTS? Posted by Customer
    A:
    Remove the wiper motor module and the bolt securing the surge tank outlet pipe to the engine rear lift bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the next step after raising it again for the 2005 Cadillac CTS? Posted by Customer
    A:
    Install the coolant pipe to generator bracket bolt and tighten it to 10 Nm (89 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the next step after removing the bracket bolt for the 2004 Cadillac SRX? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What needs to be done to the cooling system for the 2006 Cadillac SRX? Posted by Customer
    A:
    Drain the cooling system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be installed and tightened after raising for the 2007 Cadillac CTS? Posted by Customer
    A:
    Install the coolant pipe to generator bracket bolt and tighten it to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be done after removing the old hose for the 2004 Cadillac SRX? Posted by Customer
    A:
    Connect the new surge tank inlet hose to the throttle body assembly and radiator using the Hose Clamp Pliers (J 38185).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be done after tightening the bolts for the 2008 Cadillac SRX? Posted by Customer
    A:
    Raise and support the vehicle again.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    How do you connect the surge tank outlet hose to the thermostat assembly for the 2005 Cadillac SRX? Posted by Customer
    A:
    Use the Hose Clamp Pliers (J 38185) and ensure the correct fastener is used in the correct location.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be done after removing the outlet hose from the surge tank for the 2009 Cadillac STS? Posted by Customer
    A:
    Loosen the bolt on the bracket securing the surge tank outlet hose to the engine.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should you do after connecting the hose to the thermostat assembly for the 2007 Cadillac STS? Posted by Customer
    A:
    Install the bolt to the bracket securing the surge tank outlet pipe to the engine, tightening it to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the next step after removing the bracket bolt for the 2009 Cadillac SRX? Posted by Customer
    A:
    Lower the vehicle and drain the cooling system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    How do you connect the surge tank outlet hose to the thermostat assembly for the 2008 Cadillac STS? Posted by Customer
    A:
    Use the Hose Clamp Pliers (J 38185) to connect the surge tank outlet hose to the thermostat assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be done after connecting the hose to the heater hose for the 2007 Cadillac SRX? Posted by Customer
    A:
    Install the hose to the retaining features (1 and 3) on the front of the dash, compress the clamp, and connect the surge tank outlet hose to the surge tank.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What do you do after removing the bolt for the 2004 Cadillac CTS? Posted by Customer
    A:
    Take out the coolant outlet pipe from the thermostat housing and discard the O-ring seals.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Overflow Hose 25757865 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25757865 Overflow Hose is available in the market under the name GM Cooling Hose, Coolant Pipe. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25757865 Overflow Hose fits certain Cadillac CTS, SRX, STS models.
The original GM component designated by manufacturer part number 25757865 maintains top performance when functioning as the Hose, Radiator Surge Tank Overflow; Coolant Reservoir Hose; Multi Purpose Hose; Radiator Hose unit. The component 25757865 is constructed from durable material and its dimensions span 7.5 x 6.1 x 5.0 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Engine Coolant Recovery. The part 25757865 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.