Make sure this part fits

GM 19133669
Upper Ball Joint, Front

1984-2005 GM

Customer Questions & Expert Answers (11)
GM 19133669 Upper Ball Joint, Front
  • Part Description
    Stud Kit, Front Upper Control Arm Ball; Suspension Ball Joint; Ball Joint
  • Position
    Front Upper
  • Replaces
    17980952
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19133669
    Part DescriptionStud Kit, Front Upper Control Arm Ball; Suspension Ball Joint; Ball Joint
    Other NamesUpper Ball Joints; Steering Knuckle Upper Control Arm; Stud Kit.
    Item Dimensions6.9 x 4.5 x 4.5 inches
    Item Weight1.70 Pounds
    PositionFront Upper
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces17980952
    Require Quantity2
    ManufacturerGeneral Motors
    SKU19133669
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1984-2004 Chevrolet S10Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, Xtreme, ZR2, ZR54 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    1984-1994 Chevrolet S10 BlazerBase, High Country, LT, Sport, Tahoe, Tahoe LT4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    1992-2001 GMC JimmyBase, Diamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1984-1990 GMC S15Base, EL, Gypsy, High Sierra, Sierra Classic4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    1984-1991 GMC S15 JimmyBase, Gypsy, High Sierra, Sierra Classic, SLE, SLS, SLT, Timberline4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    1991-2004 GMC SonomaBase, GT, SL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    1991 GMC SycloneBase6 Cyl 4.3 L GAS
    1992-1993 GMC TyphoonBase6 Cyl 4.3 L GAS
    1996-2004, 1991-1994 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 19133669 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19133669 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you reconnect the brackets for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Reconnect the wheel speed sensor wiring harness bracket and brake hose bracket to the upper control arm, securing them with the mounting bolt and nut tightened to 24 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What is the procedure for installing the new upper ball joint for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Install it to the upper control arm, secure it with retaining bolts and nuts, and tighten them to 23 Nm (17 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    How do you check the wheel bearing for the 2004 Chevrolet S10? Posted by Customer
    A:
    Check the wheel bearing for looseness, and if present, diagnose accordingly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What are the final steps after reconnecting the brackets for the 2002 Chevrolet S10? Posted by Customer
    A:
    Load the torsion bar, reinstall the tire and wheel, lower the vehicle, and check the front wheel alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What is the final step after lowering for the 2002 Chevrolet S10? Posted by Customer
    A:
    Check the front wheel alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What should be done after removing the tire and wheel for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Unload the torsion bar and remove the wheel drive shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What should you do to release the lower ball joint from the steering knuckle for the 2000 GMC Jimmy? Posted by Customer
    A:
    With assistance, carefully hammer on the steering knuckle near the lower ball joint stud.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What is the first step to service the lower ball joint for the 2001 GMC Jimmy? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    How do you remove the upper ball joint for the 2001 GMC Jimmy? Posted by Customer
    A:
    Remove the cotter pin and the upper ball joint retaining nut, then use a pry bar under the upper control arm to pry upward. With assistance, carefully hammer the steering knuckle near the upper ball joint stud to release it, and then remove the upper ball joint from the steering knuckle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    How do you prepare the rivets for removal for the 2004 GMC Sonoma? Posted by Customer
    A:
    Drill a pilot hole in the lower ball joint rivets using a 3.175 mm (1/8 inch) drill to create a 6.35 mm (1/4 inch) deep hole in the center of each rivet, then drill the rivet heads away with a 12.7 mm (1/2 inch) drill.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19133669, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19133669 Upper Ball Joint, Front. It is sometimes referred to as GM Ball Joint. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19133669 Upper Ball Joint, Front. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery