A person should begin by supporting the vehicle then placing a screw jack with wood block beneath the
Oil Pan before continuing. The lower Engine Mount retaining nut gets removed followed by engine elevation using a screw jack until the mount experiences zero weight. Begin by eliminating the upper Engine Mount retaining nut then retrieve the Engine Mount from the vehicle while guarding the Engine Mount heat shield from any distortion. Before moving onto the left
Engine Mount Bracket, remove all retaining bolts from it. The left Engine Mount Bracket installation begins with mounting the bracket followed by tightening its bolts to 60 nm (44 ft. Lbs.). Install the Engine Mount to its vehicle position before installing the upper mount retaining nut which needs a torque force of 80 nm (59 ft. Lbs.). To put the weight on the mount lower the engine with the screw jack and install the lower retaining nut while tightening it to 80 nm (59 ft. Lbs.). Remove the screw jack together with blocking wood from underneath the Oil Pan before allowing the vehicle to descend to the ground.