To service and repair the Starter motor, begin by disconnecting the battery negative cable. If the tyre on the left is a spare one, unwrap and remove it, and in the left fender section, unravel the battery positive lead from the solenoid. Next, remove the Starter mount bolt and nut (1,2) to offset the Starter motor. For installation, start by fitting back the Starter motor to its place. Put the Starter motor mount bolt and nut in position, tighten them accordingly, since they should be tightened to 50 n.m (37 lb ft). Attach the positive Battery Cable to the Starter and tighten the nut securing the positive cable with a torque of 9 n.m (80 lb in). Replace the left tire and do the final connection of the negative cable of the battery.