Make sure this part fits

GM 12568827
Camshaft

2003-2011 GM

Customer Questions & Expert Answers (13)
GM 12568827 Camshaft
  • Part Description
    Camshaft, Engine
  • Manufacturer
    General Motors
Make sure this part fits
$248.16 MSRP: $353.54
You Save: $105.38 (30%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2011 Buick LucerneCXL, CXS, Super8 Cyl 4.6 L GAS
    2006-2010 Cadillac DTSBase, Platinum8 Cyl 4.6 L GAS
    2003-2005 Cadillac DeVilleDTS8 Cyl 4.6 L GAS
    2003 Cadillac SevilleSTS8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12568827 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12568827 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after installing the holding fixture for the 2003 Cadillac DeVille? Posted by Customer
    A:
    Remove the left secondary camshaft drive chain shoe access plug and loosen the left secondary camshaft drive chain shoe bolt two full turns.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done after tightening the camshaft sprocket bolts for the 2007 Cadillac DTS? Posted by Customer
    A:
    Remove the Timing Chain Retention Tool (EN 46327), verify the camshaft sprocket alignment, and finally remove the Camshaft Holding Tool (J 44212) before installing the left camshaft cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the torque specification for the camshaft intermediate sprocket bolt for the 2006 Cadillac DTS? Posted by Customer
    A:
    Tighten the camshaft intermediate sprocket bolt to 60 Nm (44 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the first step to replace the camshaft intermediate drive shaft for the 2010 Cadillac DTS? Posted by Customer
    A:
    First, remove the camshaft intermediate drive shaft sprocket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the first step to replace the camshaft intermediate drive shaft for the 2007 Cadillac DTS? Posted by Customer
    A:
    First, remove the camshaft intermediate drive shaft sprocket, ensuring that the drive shaft is only removed if wear is evident.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you install the camshaft intermediate drive shaft for the 2008 Cadillac DTS? Posted by Customer
    A:
    Position the camshaft intermediate drive shaft to the engine, ensuring the bolt holes are aligned.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done after removing the sprocket for the 2006 Cadillac DTS? Posted by Customer
    A:
    Next, take out the camshaft intermediate drive shaft retaining bolts and then remove the camshaft intermediate drive shaft from the engine.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the torque specification for the retaining bolts during installation for the 2009 Cadillac DTS? Posted by Customer
    A:
    Install the camshaft intermediate drive shaft retaining bolts and tighten them to 15 Nm (11 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done after removing the sprocket for the 2003 Cadillac Seville? Posted by Customer
    A:
    Next, take out the camshaft intermediate drive shaft retaining bolts and then remove the camshaft intermediate drive shaft from the engine.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you engage the crankshaft key in the sprocket for the 2003 Cadillac DeVille? Posted by Customer
    A:
    Rotate the crankshaft as necessary without altering the timing marks' relationship.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the first step to set the camshaft timing for the 2004 Cadillac DeVille? Posted by Customer
    A:
    Begin by removing the left camshaft cover, right camshaft cover, engine front cover, and the three chain tensioners (which must be fully retracted if installed).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you secure the crankshaft in position for the 2005 Cadillac DeVille? Posted by Customer
    A:
    Lock the crankshaft in position using the Flywheel Holder (J 44214).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Camshaft 12568827 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12568827 Camshaft is available in the market under the name GM Camshaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12568827 Camshaft fits certain Cadillac DTS, DeVille, Seville models, as well as Buick Lucerne models.
The original GM component designated by manufacturer part number 12568827 maintains top performance when functioning as the Camshaft, Engine unit. The component 12568827 is constructed from durable material and its dimensions span 27.8 x 3.5 x 3.4 inches while weighing 5.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 12568827 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.