Make sure this part fits

GM 12566669
Camshaft

2004-2007 GM

Customer Questions & Expert Answers (17)
GM 12566669 Camshaft
GM 12566669 Camshaft
  • Part Description
    Camshaft, Engine
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick LaCrosseCXS6 Cyl 3.6 L GAS
    2004-2006 Buick RendezvousCX, CXL, CXL Plus, Ultra6 Cyl 3.6 L GAS
    2004-2007 Cadillac CTSBase6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS
    2004-2006 Cadillac SRXBase6 Cyl 3.6 L GAS
    2005-2007 Cadillac STSBase6 Cyl 3.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12566669 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12566669 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be marked for proper assembly for the 2006 Buick LaCrosse? Posted by Customer
    A:
    Mark the timing chain and camshaft position actuators.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be ensured about the camshaft flats during this process for the 2005 Buick LaCrosse? Posted by Customer
    A:
    The camshaft flats should be parallel with the camshaft cover rail.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the next step after removing the sprocket for the 2005 Cadillac STS? Posted by Customer
    A:
    Remove the camshaft intermediate drive shaft retaining bolts and take out the camshaft intermediate drive shaft from the engine.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the first step to replace the left side camshaft for the 2007 Buick LaCrosse? Posted by Customer
    A:
    Remove the upper intake manifold with the lower intake manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be used again to prevent camshaft/engine rotation for the 2007 Buick LaCrosse? Posted by Customer
    A:
    Use an open-end wrench at the camshaft hex.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the next step after removing the camshaft components for the 2005 Buick LaCrosse? Posted by Customer
    A:
    Remove the crankshaft balancer and rotate the crankshaft using the Crankshaft Rotation Socket (EN46111) until the camshafts are in a neutral (low tension) position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What tool should be used to prevent camshaft/engine rotation for the 2006 Buick LaCrosse? Posted by Customer
    A:
    Use an open-end wrench at the camshaft hex to prevent camshaft/engine rotation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the camshaft bearing caps be installed for the 2004 Cadillac CTS? Posted by Customer
    A:
    Install the camshaft bearing caps according to the identification marks, hand-tightening the bolts in sequence until fully seated, then tighten them to 8 Nm (71 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the first step to replace the left camshaft for the 2005 Cadillac CTS? Posted by Customer
    A:
    Begin by removing the upper intake manifold along with the lower intake manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be used to lubricate the camshaft bearing surfaces and lobes for the 2004 Cadillac CTS? Posted by Customer
    A:
    Use GM P/N 1052367 (Canadian P/N 992869) or equivalent.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you ensure the camshaft flats are positioned correctly for the 2004 Cadillac SRX? Posted by Customer
    A:
    Ensure the camshaft flats are parallel with the camshaft cover rail.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done after locating the camshafts to the cylinder head for the 2005 Cadillac SRX? Posted by Customer
    A:
    Assemble the camshaft actuators.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the next step after removing the camshaft components for the 2006 Cadillac SRX? Posted by Customer
    A:
    Remove the crankshaft balancer and rotate the crankshaft using the Crankshaft Rotation Socket (EN 46111) until the camshafts are in a neutral (low tension) position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What tool should be used to prevent camshaft/engine rotation for the 2007 Cadillac STS? Posted by Customer
    A:
    Use an open-end wrench at the camshaft hex.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    When should the camshaft intermediate drive shaft be removed for the 2006 Cadillac STS? Posted by Customer
    A:
    The camshaft intermediate drive shaft should only be removed if wear is evident.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What must be done before setting the left or right secondary camshaft timing for the 2006 Cadillac STS? Posted by Customer
    A:
    The primary gears and chain must be properly timed prior to setting the left or right secondary camshaft timing using the Crankshaft Socket (J 39946).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Camshaft 12566669 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12566669 Camshaft is available in the market under the name GM Camshaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12566669 Camshaft fits certain Cadillac CTS, SRX, STS models, as well as Buick LaCrosse, Rendezvous models.
The original GM component designated by manufacturer part number 12566669 maintains top performance when functioning as the Camshaft, Engine unit. The component 12566669 is constructed from durable material and its dimensions span 28.7 x 3.4 x 3.5 inches while weighing 4.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 12566669 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.