Make sure this part fits

GM 15923803
Compressor Clutch

2002-2010 GM

Customer Questions & Expert Answers (13)
GM 15923803 Compressor Clutch
  • Part Description
    Clutch Kit, Air Conditioner Compressor Clutch; A/C Compressor Clutch
  • Replaces
    22687702
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2005 Chevrolet CavalierBase, LS, LS Sport4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS
    2005-2010 Chevrolet CobaltBase, LS, LT, LTZ, Sport, SS4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2008-2010, 2006 Chevrolet HHRLS, LT, SS, SS Panel4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2007-2008 Pontiac G5Base, GT4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2002-2005 Pontiac SunfireBase, GT, SE4 Cyl 2.2 L GAS
    2003-2007 Saturn Ion1, 2, 3, Red Line4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15923803 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15923803 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What tools are needed to replace the compressor clutch assembly for the 2005 Chevrolet Cavalier? Posted by Customer
    A:
    Universal Spanner Wrench (J 37872) and Snap Ring Pliers (J 6083).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Clutch
    Q:
    How do you measure and adjust the air gap for the 2006 Chevrolet HHR? Posted by Customer
    A:
    Measure the air gap between the pulley and the drive plate, adjusting the shims to achieve a 0.3-0.6 mm (0.012-0.024 in) air gap, ensuring the drive plate does not drag against the pulley.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Clutch
    Q:
    How do you remove the compressor clutch plate for the 2010 Chevrolet Cobalt? Posted by Customer
    A:
    Discard the compressor clutch plate bolt using the Universal Spanner Wrench (J 37872) and then remove the compressor clutch plate from the compressor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Clutch
    Q:
    What is the final step in securing the clutch drive plate for the 2005 Chevrolet Cobalt? Posted by Customer
    A:
    Install the clutch drive plate bolt, ensuring the new bolt has colored adhesive on at least 5 threads, and tighten it to 12 N.m (9 lb ft) while using the Universal Spanner Wrench (J 37872) to hold the compressor clutch plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Clutch
    Q:
    What is the required air gap between the pulley and the drive plate for the 2007 Chevrolet Cobalt? Posted by Customer
    A:
    Measure the air gap and adjust the shims to achieve a 0.3-0.6 mm (0.012-0.024 in) air gap.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Clutch
    Q:
    What tools are needed to replace the compressor clutch assembly for the 2006 Chevrolet Cobalt? Posted by Customer
    A:
    Universal Spanner Wrench (J 37872) and Snap Ring Pliers (J 6083).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Clutch
    Q:
    How should the air gap shim be prepared for the 2008 Chevrolet Cobalt? Posted by Customer
    A:
    Apply a small amount of oil to the 0.4 mm (0.016 in) air gap shim and place it inside the clutch drive plate before installing the compressor clutch plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Clutch
    Q:
    How do you remove the compressor clutch plate for the 2009 Chevrolet Cobalt? Posted by Customer
    A:
    Discard the compressor clutch plate bolt using the Universal Spanner Wrench (J 37872) and remove the compressor clutch plate from the compressor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Clutch
    Q:
    How should the clutch plate bolt threads be prepared for the 2008 Chevrolet HHR? Posted by Customer
    A:
    Clean the clutch plate bolt threads with a M6x1.0 tap and blow out debris with compressed air before installing the compressor clutch coil.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Clutch
    Q:
    What is the procedure for installing the clutch pulley for the 2008 Chevrolet HHR? Posted by Customer
    A:
    Install the clutch pulley onto the A/C compressor using a hydraulic press, ensuring the snap ring is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Clutch
    Q:
    What is the procedure for installing the compressor clutch coil for the 2009 Chevrolet HHR? Posted by Customer
    A:
    Install the compressor clutch coil to the compressor and secure it with the compressor clutch coil snap ring using the External Snap Ring Pliers (J 6083).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Clutch
    Q:
    What should be done before installing the clutch coil for the 2010 Chevrolet HHR? Posted by Customer
    A:
    Clean all mounting surfaces and align the dimple on the clutch coil with the notch in the A/C compressor casting.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Clutch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Compressor Clutch 15923803 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15923803 Compressor Clutch is available in the market under the name GM A/C Clutch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15923803 Compressor Clutch fits certain Chevrolet Cobalt, HHR, Cavalier models, as well as Pontiac G5, Sunfire. Additionally, it is compatible with Saturn Ion models.
The original GM component designated by manufacturer part number 15923803 maintains top performance when functioning as the Clutch Kit, Air Conditioner Compressor Clutch; A/C Compressor Clutch unit. The component 15923803 is constructed from durable material and its dimensions span 7.0 x 6.5 x 3.3 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Clutch; Clutch Kit, A/C Compressor Clutch. The part 15923803 has available replacement options 22687702. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.