Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 25793553
Upper Control Arm, Passenger Side

2000-2024 GM

Customer Questions & Expert Answers (14)
GM 25793553 Upper Control Arm, Passenger Side
GM 25793553 Upper Control Arm, Passenger Side
GM 25793553 Upper Control Arm, Passenger Side
GM 25793553 Upper Control Arm, Passenger Side
  • Part Description
    Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
  • Position
    Passenger Side
  • Replaces
    12475482, 15049880
  • Manufacturer
    General Motors
Make sure this part fits
$221.64 MSRP: $377.33
You Save: $155.69 (42%)
Ships in 1-2 Business Days
1
ADD TO CART

  • 25793553 Upper Control Arm, Passenger Side is Ref No. 14 in the diagram below

    2022 Chevy Express 2500 Upper Control Arm, Passenger Side Diagram for 25793553
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 25793553

  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2024 Chevrolet Express 2500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    2003-2024 Chevrolet Express 3500Base, LS, LT6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    2000 Chevrolet Suburban 2500Base, LS, LT8 Cyl 6.0 L GAS
    2003-2014 GMC Savana 1500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2024 GMC Savana 2500Base, LS, LT, SLE4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    2003-2024 GMC Savana 3500Base, LS, LT, SLE6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    2000 GMC Yukon XL 2500SLE, SLT8 Cyl 6.0 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25793553 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25793553 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the upper control arm on GMC Savana 2500? Posted by Customer
    A:
    To replace the upper Control Arm, start by supporting the vehicle and lifting it up. Support the lower Control Arm by a jack stand, remove the tire and the wheel. Next, disassemble the retaining bolts for the brake hose and the wheel speed senor brackets as well as the wheel drive shaft (4WD only). Using the j 43631 (BallJoint Remover) and j 45851 (BallJoint Separator Protector Adapters), remove upper ball joint retaining nut and disconnect upper ball joint from Steering Knuckle. Then, there are the upper Control Arm nuts and adjustment cams that will need to be taken out, followed by the upper Control Arm bolts, after which the upper Control Arm comes out. Installation begins by installing the new upper Control Arm and bolts. Mount the upper Control Arm nuts and adjustment cams, and tighten to 175 n.m (129 lb ft). Connect the upper Control Arm to the Steering Knuckle and install the new upper ball joint retaining nut of 50 n.m (37 lb ft). If it is applicable, install the wheel drive shaft (4WD only) and the retaining bolts for the brake hose and wheel speed sensor brackets while tighten the brake hose bracket to Steering Knuckle bolt to 10 n.m (88 lb in) and the brake hose bracket to upper Control Arm Bolt to 10 n.m (88 lb in). Lastly, mount the whole tire and wheel, deflate the safety stands, lower the vehicle, verify the wheel alignment.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the torque specification for tightening the upper control arm nuts for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Tighten the nuts to 175 N.m (129 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What components need to be removed next for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Take off the shock absorber lower retaining nut and bolt, then the lower ball joint retaining nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be removed after raising for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after connecting the lower ball joint for the 2010 Chevrolet Express 3500? Posted by Customer
    A:
    Install a new lower ball joint retaining nut and tighten it to 100 Nm (74 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be removed after raising the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you disconnect the upper control arm from the steering knuckle for the 2010 GMC Savana 3500? Posted by Customer
    A:
    Discard the upper ball joint retaining nut and use the J 43631 (Ball Joint Remover) and J 45851 (Ball Joint Separator Protector Adapters).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the upper control arm for the 2006 GMC Savana 3500? Posted by Customer
    A:
    Raise and support the vehicle and support the lower control arm with a jack stand.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the lower control arm for the 2009 GMC Savana 1500? Posted by Customer
    A:
    First, raise and support the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What are the final steps after reinstalling all components for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Finally, reinstall the tire and wheel, remove the support, lower the vehicle, and check the wheel alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you disconnect the lower ball joint from the steering knuckle for the 2007 GMC Savana 2500? Posted by Customer
    A:
    Use the J 43631 Ball Joint Remover and the J 45851 Ball Joint Separator Protector Adapters.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after connecting the upper control arm to the steering knuckle for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Install the new upper ball joint retaining nut, tightening it to 50 Nm (37 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What are the final steps after completing the installation for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Reinstall the tire and wheel, remove the safety stands, lower the vehicle, and check the wheel alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Upper Control Arm, Passenger Side 25793553 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25793553 Upper Control Arm, Passenger Side is available in the market under the name GM Control Arm. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25793553 Upper Control Arm, Passenger Side fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 25793553 maintains top performance when functioning as the Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly. unit at its Passenger Side. The component 25793553 is constructed from durable material and its dimensions span 4.8 x 15.3 x 12.2 inches while weighing 7.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 25793553 has available replacement options 12475482, 15049880. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.