Make sure this part fits

GM 10391186
Grip Handle, Driver Side

2000-2007 GM

Customer Questions & Expert Answers (20)
GM 10391186 Grip Handle, Driver Side
  • Part Description
    Handle, Door Inside Assist Handle
  • Position
    Driver Side
  • Replaces
    15761202, 15752941
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2006 Chevrolet Avalanche 1500LS, LT, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2006 Chevrolet Avalanche 2500LS, LT8 Cyl 8.1 L GAS
    2001-2007 Chevrolet Silverado 1500Base, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicLS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2001-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10391186 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10391186 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the rear door exterior handle for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Begin by removing the trim panel and pulling back the water deflector as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the torque specification for the outside handle mounting nuts for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Tighten them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front door interior handle for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    First, remove the trim panel and the mounting bolts from the inside door handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done if the lock cylinder is binding for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Consult the appropriate guidelines.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be applied to the lock cylinder before installation for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Apply a coating of GM P/N 12345120 or Canadian P/N 726548 or a similar lubricant to the inside of the lock case and the cylinder keyway.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the rear door exterior handle for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Begin by removing the trim panel and pulling back the water deflector as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the trim panel for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Disconnect the lock cylinder rod from the rod clip, then remove the outside handle nuts and the outside handle itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the masking tape from the door handle for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Install the outside handle mounting nuts, tightening them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after releasing the inside door handle for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Disconnect the control rod from the inside door handle and remove the door handle assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How should the handle rod be connected for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Connect the handle rod to the handle assembly clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What are the final steps after installing the handle for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Reinstall the rubber cover, the water deflector, and the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How should a binding lock cylinder issue be addressed for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Address the issue accordingly for a binding lock cylinder repair.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step in the installation process for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Install the inside door handle retaining bolts, tightening them to 9 Nm (80 lb in), and reinstall the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to service and repair the front door interior handle for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Begin by replacing the handle bezel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be detached after removing the trim panel for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Detach the outside handle rod and the lock cylinder rod from their respective clips.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after lubricating the lock cylinder for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Install the door lock cylinder into the outside handle housing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after applying lubricant to the lock cylinder for the 2006 GMC Yukon? Posted by Customer
    A:
    Install the door-lock cylinder into the outside handle housing and attach the lock cylinder clip to the lock cylinder rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step for installation of the new door handle for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Connect the control rod to the inside door handle and slide the handle into place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after removing the door handle assembly for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    For installation, connect the control rod to the inside door handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Grip Handle, Driver Side 10391186 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10391186 Grip Handle, Driver Side is available in the market under the name GM Door Handle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10391186 Grip Handle, Driver Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 10391186 maintains top performance when functioning as the Handle, Door Inside Assist Handle unit at its Driver Side. The component 10391186 is constructed from durable material and its dimensions span 11.9 x 8.4 x 3.1 inches while weighing 1.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Assist Strap. The part 10391186 has available replacement options 15761202, 15752941. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.