Make sure this part fits

GM 10391191
Grip Handle, Passenger Side

2000-2007 GM

Customer Questions & Expert Answers (20)
GM 10391191 Grip Handle, Passenger Side
  • Part Description
    Handle, Door Inside Assist Handle
  • Position
    Passenger Side
  • Replaces
    15752942, 15761203
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2006 Chevrolet Avalanche 1500LS, LT, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2006 Chevrolet Avalanche 2500LS, LT8 Cyl 8.1 L GAS
    2001-2007 Chevrolet Silverado 1500Base, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicLS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2001-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10391191 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10391191 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the front door exterior handle for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Begin by removing the trim panel and the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done for a binding lock cylinder repair for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Follow the appropriate procedures for the repair.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step after installing the door handle for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    Finally, install the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you access the outboard nut for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Take off the rubber cover to access the outboard nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front door exterior handle for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    First, remove the trim panel and the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after releasing the inside door handle for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Disconnect the control rod from the inside door handle and remove the door handle assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after applying lubricant to the lock cylinder for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Install the door-lock cylinder back into the outside handle housing and attach the lock cylinder clip to the lock cylinder rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the rear door exterior handle for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Begin by removing the trim panel and pulling back the water deflector as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How should the outside handle mounting nuts be tightened for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Install the outside handle mounting nuts, tightening them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What needs to be removed to access the outboard nut for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Take off the rubber cover to access the outboard nut and remove the door lock cylinder from the outside handle housing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should you do after releasing the tab retainers for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Remove the door handle bezel from the door panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you access the outboard nut for the 2006 GMC Yukon? Posted by Customer
    A:
    Access the outboard nut by removing the rubber cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the trim panel for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Take out the inside door handle mounting bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after connecting the rods for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Remove the masking tape from the door handle, then install the outside handle mounting nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you access the outboard nut for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Access the outboard nut by removing the rubber cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the torque specification for tightening the outside handle mounting nuts for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Ensure to tighten the outside handle mounting nuts to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be applied to the lock cylinder before installation for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Apply a coating of GM P/N 12345120 (Canadian P/N 726548) or a similar lubricant to the inside of the lock case and the cylinder keyway.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after sliding the handle into place for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Install the inside door handle retaining bolts and tighten them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front door interior handle for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    First, remove the trim panel and the inside door handle mounting bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Grip Handle, Passenger Side 10391191 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10391191 Grip Handle, Passenger Side is available in the market under the name GM Door Handle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10391191 Grip Handle, Passenger Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 10391191 maintains top performance when functioning as the Handle, Door Inside Assist Handle unit at its Passenger Side. The component 10391191 is constructed from durable material and its dimensions span 12.2 x 8.7 x 2.4 inches while weighing 1.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Assist Strap. The part 10391191 has available replacement options 15752942, 15761203. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.