Make sure this part fits

GM 15226255
Motor Mount

2005-2009 GM

Customer Questions & Expert Answers (18)
GM 15226255 Motor Mount
GM 15226255 Motor Mount
  • Part Description
    Mount, Engine Mount Dampening; Engine Mount Bracket
  • Replaces
    15141808, 10385567
  • Manufacturer
    General Motors
Make sure this part fits
$125.59 MSRP: $215.69
You Save: $90.10 (42%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006 Cadillac EscaladeBase8 Cyl 6.0 L GAS
    2005-2006 Chevrolet Avalanche 1500Base, LS, LT, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2006 Chevrolet Silverado 1500Hybrid, LS, LT, WT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, WT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS
    2005-2006 Chevrolet Suburban 1500Base, LS, LT, LTZ, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006 Chevrolet TahoeBase, LS, LT, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2006 GMC Sierra 1500Hybrid, SL, SLE, SLT, WT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS
    2007 GMC Sierra 1500 ClassicHybrid, SL, SLE, SLT, WT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS
    2005-2006 GMC YukonSL, SLE, SLT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2005-2006 GMC Yukon XL 1500Denali, SL, SLE, SLT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15226255 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15226255 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the procedure for installing the new left engine mount for the 2006 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Position the left engine mount onto the engine and install the engine mount bolts, tightening them to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step to replace the transmission mount on a 4L80-E/4L85-E automatic transmission for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Raise and support the vehicle, then support the transmission with a transmission jack.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the next step after installing the new transmission mount for the 2005 Chevrolet Tahoe? Posted by Customer
    A:
    Lower the transmission and install the transmission mount to the transmission support retaining nut or nuts, tightening them to 40 Nm (30 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the torque specification for the engine mount bracket bolts for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Tighten them to 75 Nm (55 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after raising the transmission for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Take out the transmission mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be done after removing the exhaust manifold for the 2005 Chevrolet Tahoe? Posted by Customer
    A:
    Raise and suitably support the vehicle, then remove the tire and wheel, followed by the inner wheelhouse panel and the engine protection shield if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How do you install the new transmission mount for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Position the transmission mount back onto the vehicle and secure it with the transmission or transfer case adapter mounting bolts, tightening them to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How do you install the engine mount for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the engine mount and its bolts, tightening them to 50 Nm (37 ft. lbs.), then lower the engine and reinstall the starter.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step to replace the rear transmission mount on the NV 4500 manual transmission for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Raise and suitably support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the final step in the process for the 2005 Chevrolet Tahoe? Posted by Customer
    A:
    Remove the transmission jack and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be done after supporting the transmission for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Remove the transmission mount to the transmission support retaining nut or nuts, and raise the transmission to relieve the weight on the mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the final step in the process for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the transmission jack and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the next step after removing the engine mount side bracket for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Proceed to remove the engine mount bracket bolts and the bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after installing the engine mount for the 2005 GMC Yukon? Posted by Customer
    A:
    Reinstall the front propeller shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step for installation for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Install the engine mount bracket, ensuring to remove all traces of the original adhesive patch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be removed after raising for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the transmission mount to crossmember nut and the transmission mount to transmission bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the next step after installing the new transmission mount for the 2006 GMC Yukon? Posted by Customer
    A:
    Lower the transmission and install the transmission mount to the transmission support retaining nut or nuts, tightening them to 40 Nm (30 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Motor Mount 15226255 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15226255 Motor Mount is available in the market under the name GM Engine Mount, Motor And Transmission Mount. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15226255 Motor Mount fits certain Chevrolet Tahoe, Silverado 1500, Suburban 1500 models, as well as GMC Sierra 1500, Yukon, Yukon XL 1500. Additionally, it is compatible with Cadillac Escalade and Hummer H2 models.
The original GM component designated by manufacturer part number 15226255 maintains top performance when functioning as the Mount, Engine Mount Dampening; Engine Mount Bracket unit. The component 15226255 is constructed from durable material and its dimensions span 6.9 x 6.4 x 6.4 inches while weighing 4.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Front Mount; Mount, Engine Mounting. The part 15226255 has available replacement options 15141808, 10385567. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.