Make sure this part fits

GM 25974696
Upper Hose

2004-2010 GM

Customer Questions & Expert Answers (25)
GM 25974696 Upper Hose
  • Part Description
    Hose, Radiator Inlet (Upper); Multi Purpose Hose; Radiator Hose; Cooling Hose
  • Position
    Upper
  • Replaces
    88957426, 89023438
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac SRXBase8 Cyl 4.6 L GAS
    2005-2010 Cadillac STSBase, Platinum8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25974696 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25974696 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    Where do you remove the radiator outlet hose from for the 2005 Cadillac SRX? Posted by Customer
    A:
    Remove the radiator outlet hose from the thermostat housing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    What should be done before installing the new inlet radiator hose for the 2004 Cadillac SRX? Posted by Customer
    A:
    Lubricate the inside diameters of the hoses with clean coolant.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    What is the first step to replace the Engine Coolant Inlet Pipe (LY7) for the 2004 Cadillac SRX? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the final step after replacing the radiator inlet hose for the 2007 Cadillac SRX? Posted by Customer
    A:
    Fill the cooling system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    What is the first step in the installation process for the 2006 Cadillac SRX? Posted by Customer
    A:
    Install the coolant pipe and loosely assemble all the coolant pipe bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the first step to replace the radiator surge tank inlet hose (LY7) for the 2004 Cadillac SRX? Posted by Customer
    A:
    Partially drain the cooling system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be done before installing the new inlet radiator hose for the 2007 Cadillac STS? Posted by Customer
    A:
    Lubricate the inside diameters of the hoses with clean coolant.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    What bolts need to be removed before taking out the coolant pipe for the 2008 Cadillac SRX? Posted by Customer
    A:
    Remove the coolant pipe to thermostat bolt and the coolant pipe to cylinder head bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    How do you connect the surge tank outlet hose to the thermostat assembly for the 2007 Cadillac STS? Posted by Customer
    A:
    Use the Hose Clamp Pliers (J 38185) to connect it to the thermostat assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What tool is used to remove the outlet hose from the surge tank for the 2005 Cadillac SRX? Posted by Customer
    A:
    Use the Hose Clamp Pliers (J 38185).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the next step after removing the bracket bolt for the 2007 Cadillac STS? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    How do you attach the new radiator inlet hose for the 2009 Cadillac STS? Posted by Customer
    A:
    Use the Hose Clamp Pliers (J 38185) to disengage the tension on the hose clamp and attach the radiator inlet hose to the radiator, sliding the clamp into its original position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    What is the next step after securing the hose to the radiator for the 2009 Cadillac SRX? Posted by Customer
    A:
    Attach the radiator inlet hose to the thermostat housing and slide the clamp into the original position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    How do you secure the new radiator inlet hose for the 2008 Cadillac SRX? Posted by Customer
    A:
    Use the Hose Clamp Pliers (J 38185) to engage the hose clamp and secure the radiator inlet hose to the radiator, then slide the clamp into the original position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    How do you detach the surge tank outlet hose from the surge tank for the 2005 Cadillac STS? Posted by Customer
    A:
    Compress the clamp to detach the surge tank outlet hose from the surge tank.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    How do you install the new radiator inlet hose to the radiator for the 2006 Cadillac SRX? Posted by Customer
    A:
    Use the Hose Clamp Pliers (J38185) to disengage the tension on the hose clamp, install the hose, and slide the clamp into the original position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    What should be done with the hose after detaching it from the surge tank for the 2007 Cadillac SRX? Posted by Customer
    A:
    Separate the hose from the retaining features (1 and 3) on the front of the dash.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What tool is needed to disengage the tension on the hose clamp for the 2008 Cadillac STS? Posted by Customer
    A:
    Utilize the Hose Clamp Pliers (J 38185) to disengage the tension on the hose clamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    What should be done to the bolt on the bracket for the 2008 Cadillac STS? Posted by Customer
    A:
    Loosen the bolt on the bracket that secures the surge tank outlet hose to the engine.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What tool is used to remove the outlet hose from the surge tank for the 2009 Cadillac STS? Posted by Customer
    A:
    Use the J 38185 Hose Clamp Pliers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the first step to replace the radiator outlet hose (LY7) for the 2007 Cadillac STS? Posted by Customer
    A:
    First, drain the coolant and remove the radiator inlet hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    What is the final step after replacing the radiator inlet hose for the 2005 Cadillac STS? Posted by Customer
    A:
    Fill the cooling system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    Q:
    What is the torque specification for the coolant pipe to thermostat bolt for the 2009 Cadillac SRX? Posted by Customer
    A:
    Tighten it to 23 Nm (17 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    How do you remove the radiator outlet hose from the radiator for the 2010 Cadillac STS? Posted by Customer
    A:
    Using the J 38185 (Hose Clamp Pliers), disengage the tension on the hose clamp and remove the radiator outlet hose from the radiator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radiator Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Upper Hose 25974696 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25974696 Upper Hose is available in the market under the name GM Cooling Hose, Radiator Hose, Coolant Pipe. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25974696 Upper Hose fits certain Cadillac SRX, STS models.
The original GM component designated by manufacturer part number 25974696 maintains top performance when functioning as the Hose, Radiator Inlet (Upper); Multi Purpose Hose; Radiator Hose; Cooling Hose unit at its Upper. The component 25974696 is constructed from durable material and its dimensions span 14.6 x 5.8 x 4.6 inches while weighing 1.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 25974696 has available replacement options 88957426, 89023438. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.