Make sure this part fits

GM 19177868
Outer CV Joint Boot, Front

2000-2009 GM

Customer Questions & Expert Answers (13)
GM 19177868 Outer CV Joint Boot, Front
  • Part Description
    Boot Kit, Front Wheel Drive Axle Shaft; CV Boot
  • Position
    Front
  • Replaces
    26073374
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    2005-2009 Buick LaCrosseCX, CXL6 Cyl 3.8 L GAS
    2000-2005 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    2006-2008 Buick LucerneCX, CXL6 Cyl 3.8 L GAS
    2000-2004 Buick RegalLS, LSE6 Cyl 3.8 L GAS
    2000-2005 Chevrolet ImpalaBase, LS, LS Sport, Police, SS6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    2000-2005 Chevrolet Monte CarloLS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    2000-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    2000-2002 Oldsmobile IntrigueGL, GLS, GX6 Cyl 3.5 L GAS
    2000-2004 Oldsmobile SilhouetteGL, GLS, Premiere6 Cyl 3.4 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19177868 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19177868 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the assembly process for the 2000 Buick Century? Posted by Customer
    A:
    Align the inboard boot, housing, and large boot retaining clamp, crimp the clamp with the Seal Clamp Tool (J 35910) to 174 Nm (130 lbs.), and check the gap dimension on the clamp ear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How do you remove the CV joint assembly from the halfshaft bar for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Spread the ears on the race retaining ring with the J 8059 and remove the assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What is the procedure for swage ring installation for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Mount J 41048 in a vise, position the inboard end of the halfshaft assembly in the tool, align the top of the seal neck on the bottom die, and place the top half of J 41048 on the lower half.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How do you prepare the new joint boot for assembly for the 2000 Buick LeSabre? Posted by Customer
    A:
    Place the new swage ring onto the small end of the joint boot and slide both onto the halfshaft bar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What is the torque specification for the large boot retaining clamp for the 2000 Buick LeSabre? Posted by Customer
    A:
    176 Nm (130 ft. lbs.), checking the gap dimension on the clamp ear to ensure it meets the required standard.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How do you remove the large boot retaining clamp for the 2000 Buick Regal? Posted by Customer
    A:
    Use side cutters to remove and discard the large boot retaining clamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How should the bolts be tightened during assembly for the 2000 Chevrolet Monte Carlo? Posted by Customer
    A:
    Insert and tighten the bolts by hand until snug, ensuring no pinch points on the boot, then tighten each bolt of J 41048 180° at a time using a ratchet wrench.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How do you position the boot during assembly for the 2000 Chevrolet Monte Carlo? Posted by Customer
    A:
    Position the boot into the boot groove on the bar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What is the assembly process for the new boot for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Place a new swage ring onto the small end of the joint boot and slide both onto the halfshaft bar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What should be done after adjusting the seal for proper shape for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Position the joint assembly at the proper vehicle dimension and align the wheel drive shaft outboard seal, tripot housing, and large seal retaining clamp while latching.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How do you crimp the boot retaining clamp for the 2000 Chevrolet Venture? Posted by Customer
    A:
    While latching, align the halfshaft inboard boot, tripot housing, and large boot retaining clamp, and crimp the boot retaining clamp with Drive Axle Seal Clamp Pliers (J 35910) to 176 Nm (130 ft. lbs.), using a breaker bar and torque wrench if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How do you remove the CV joint assembly for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Remove it from the halfshaft bar and discard the old outboard seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Outer CV Joint Boot, Front 19177868 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19177868 Outer CV Joint Boot, Front is available in the market under the name GM CV Boot. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19177868 Outer CV Joint Boot, Front fits certain Chevrolet Impala, Monte Carlo, Venture models, as well as Buick Regal, LaCrosse, LeSabre. Additionally, it is compatible with Pontiac Grand Prix, Bonneville, Montana and Oldsmobile Intrigue, Silhouette models.
The original GM component designated by manufacturer part number 19177868 maintains top performance when functioning as the Boot Kit, Front Wheel Drive Axle Shaft; CV Boot unit at its Front. The component 19177868 is constructed from durable material and its dimensions span 6.6 x 6.4 x 6.2 inches while weighing 1.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Inner CV Joint Boot; Inner Boot; Inner Boot Kit; Boots. The part 19177868 has available replacement options 26073374. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.