Make sure this part fits

GM 10356433
Upper Control Arm, Driver Side

2004-2013 GM

Customer Questions & Expert Answers (14)
GM 10356433 Upper Control Arm, Driver Side
  • Part Description
    Arm, Steering Knuckle Upper & Lower Control; Suspension Control Arm; Control Arm
  • Position
    Driver Side
  • Manufacturer
    General Motors
Make sure this part fits
$226.34 MSRP: $385.37
You Save: $159.03 (42%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac XLRBase, Platinum, V8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    2005-2013 Chevrolet Corvette427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR18 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10356433 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10356433 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be reconnected after the upper control arm installation for the 2004 Cadillac XLR? Posted by Customer
    A:
    The wheel speed sensor electrical connector and the electronic suspension control sensor link.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the installation process for the lower control arm for the 2007 Cadillac XLR? Posted by Customer
    A:
    Position the lower control arm in place, install the cam bolts, washers, and nuts, ensuring the cam bolts are in the marked position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done to the upper ball joint stud nut for the 2007 Cadillac XLR? Posted by Customer
    A:
    Loosen the upper ball joint stud nut without removing it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you separate the lower ball joint stud from the steering knuckle for the 2009 Cadillac XLR? Posted by Customer
    A:
    Use J-42188-B to separate the lower ball joint stud from the steering knuckle, then remove the stud.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How should the suspension knuckle upper ball joint stud be inserted for the 2008 Cadillac XLR? Posted by Customer
    A:
    Insert the suspension knuckle upper ball joint stud into the upper control arm, using an Allen wrench if necessary to prevent spinning.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done with the suspension knuckle upper ball joint stud for the 2009 Cadillac XLR? Posted by Customer
    A:
    Insert it into the upper control arm and tighten the ball joint stud nut to 30 Nm (22 lb ft) plus 195 degrees.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done with the cam bolts during installation for the 2005 Cadillac XLR? Posted by Customer
    A:
    Tighten the cam bolts without setting them to final torque specifications due to the need for a wheel alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be reconnected after the installation for the 2010 Chevrolet Corvette? Posted by Customer
    A:
    The wheel speed sensor electrical connector and the electronic suspension control sensor link.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the rear axle upper control arm for the 2008 Chevrolet Corvette? Posted by Customer
    A:
    Begin by raising and supporting the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be removed after raising for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    Remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the next step after removing the lower control arm for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    Remove the jack stand and the lower control arm from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be removed after raising for the 2005 Chevrolet Corvette? Posted by Customer
    A:
    Remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What tool is used to separate the suspension knuckle from the upper control arm for the 2006 Chevrolet Corvette? Posted by Customer
    A:
    Use the Ball Joint Separator (J 42188).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Upper Control Arm, Driver Side 10356433 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10356433 Upper Control Arm, Driver Side is available in the market under the name GM Control Arm. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10356433 Upper Control Arm, Driver Side fits certain Chevrolet Corvette models, as well as Cadillac XLR models.
The original GM component designated by manufacturer part number 10356433 maintains top performance when functioning as the Arm, Steering Knuckle Upper & Lower Control; Suspension Control Arm; Control Arm unit at its Driver Side. The component 10356433 is constructed from durable material and its dimensions span 18.3 x 17.6 x 3.1 inches while weighing 2.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 10356433 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.