Make sure this part fits

GM 19122384
Brake Pads, Front

2004-2009 GM

Customer Questions & Expert Answers (15)
GM 19122384 Brake Pads, Front
  • Part Description
    Pad Kit, Front Disc Brake; Disc Brake Hardware Kit
  • Position
    Front
  • Replaces
    18047994
  • Manufacturer
    General Motors
Make sure this part fits
$114.60 MSRP: $205.57
You Save: $90.97 (45%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2007 Cadillac CTSBase, V6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.0 L GAS
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    2005-2009 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    2004-2005 Pontiac BonnevilleGXP8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19122384 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19122384 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you compress the caliper piston for the 2006 Cadillac CTS? Posted by Customer
    A:
    Use a large C-clamp over the brake caliper body, positioning the ends against the rear of the caliper and the outboard brake pad, and tighten it until the caliper piston is compressed enough to slide past the brake rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should you do after reinstalling the tire and wheel assembly for the 2008 Cadillac SRX? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    How do you support the brake caliper during the process for the 2007 Cadillac SRX? Posted by Customer
    A:
    Use heavy mechanic wire to support the brake caliper and prevent damage to the hydraulic flexible brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the first step to replace the rear disc brake pads (J56) for the 2007 Cadillac CTS? Posted by Customer
    A:
    Inspect the fluid level in the brake master cylinder reservoir; if the level is midway between the maximum and minimum points, no fluid needs to be removed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be inspected for damage or corrosion for the 2009 Cadillac SRX? Posted by Customer
    A:
    Inspect the brake caliper guide pin bolts and pins, and check the guide pin boots for cuts or deterioration.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the next step after supporting the brake caliper for the 2005 Cadillac SRX? Posted by Customer
    A:
    Pivot the caliper upward and remove the brake pads and retainers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What tool should be used to compress the caliper pistons for the 2005 Cadillac STS? Posted by Customer
    A:
    ONLY a plastic flat-bladed trim tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the final step in the process for the 2009 Cadillac STS? Posted by Customer
    A:
    Fill the brake master cylinder reservoir to the proper level and burnish the pads and rotors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the first step to replace the rear brake pads for the 2006 Cadillac STS? Posted by Customer
    A:
    Inspect the fluid level in the brake master cylinder reservoir; if the level is between the maximum and minimum points, no fluid needs to be removed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done after removing the brake pads for the 2009 Cadillac STS? Posted by Customer
    A:
    Inspect the brake caliper guide pins and replace if damaged or corroded, and check the brake caliper piston boot for damage, replacing if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done until a firm brake pedal feel is achieved for the 2008 Cadillac SRX? Posted by Customer
    A:
    Repeat the process of applying and releasing the brake pedal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done after inspecting the fluid level for the 2006 Cadillac SRX? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done after inspecting the fluid level for the 2008 Cadillac STS? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    How do you compress the caliper piston for the 2007 Cadillac STS? Posted by Customer
    A:
    Use a large C-clamp to compress the caliper piston into the caliper bore, allowing the caliper to slide past the brake rotor, and then remove the C-clamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Brake Pads, Front 19122384 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19122384 Brake Pads, Front is available in the market under the name GM Brake Pad. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19122384 Brake Pads, Front fits certain Cadillac CTS, SRX, STS models, as well as Pontiac Bonneville models.
The original GM component designated by manufacturer part number 19122384 maintains top performance when functioning as the Pad Kit, Front Disc Brake; Disc Brake Hardware Kit unit at its Front. The component 19122384 is constructed from durable material and its dimensions span 11.5 x 4.9 x 5.0 inches while weighing 4.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Front Pads; Pad Kit, Brake. The part 19122384 has available replacement options 18047994. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.