Make sure this part fits

GM 52487082
Blower Motor Tube

2000-2005 GM

Customer Questions & Expert Answers (18)
GM 52487082 Blower Motor Tube
  • Part Description
    Tube, Air Conditioner Blower Motor Cooling; A/C Refrigerant Liquid Hose; A/C Hose
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    2000-2004 Buick RegalGS, GSE, LS, LSE6 Cyl 3.8 L GAS
    2001-2003 Chevrolet ImpalaBase, LS, LS Sport6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    2001-2003 Chevrolet Monte CarloLS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    2001-2002 Oldsmobile IntrigueGL, GLS, GX6 Cyl 3.5 L GAS
    2000 Oldsmobile SilhouetteGL, GLS, Premiere6 Cyl 3.4 L GAS
    2001-2003 Pontiac Grand PrixGT, GTP, SE6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Hi! Is this 52487082 a perfect fit for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 52487082 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What steps are involved in removing the condenser tube for the 2005 Buick Century? Posted by Customer
    A:
    Remove the condenser tube from the support clip, loosen the evaporator tube nut from the condenser tube, and disconnect the evaporator tube from the condenser tube before removing the condenser tube itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the next step after disconnecting the hose from the condenser for the 2004 Buick Century? Posted by Customer
    A:
    Remove the A/C compressor hose nut and detach the A/C compressor hose from the accumulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the procedure for installing the new A/C compressor hose assembly for the 2001 Buick Regal? Posted by Customer
    A:
    Install the new O-ring seal and sealing washers onto the A/C compressor hose assembly, attach it to the rear of the A/C compressor, and secure it with the hose assembly nut, tightening it to 33 N.m (24 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done with the O-ring and A/C pressure sensor for the 2003 Buick Century? Posted by Customer
    A:
    Discard the O-ring and remove the A/C pressure sensor from the condenser tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done if it is equipped with a cross brace for the 2000 Buick Regal? Posted by Customer
    A:
    Remove the cross vehicle brace and recover the refrigerant.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is important to do with the used O-rings and sealing washers for the 2003 Buick Regal? Posted by Customer
    A:
    Remove and discard all used O-rings and sealing washers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    How do you remove the evaporator tube for the 2001 Buick Regal? Posted by Customer
    A:
    Carefully remove the evaporator tube from the evaporator bolt and disconnect the evaporator inlet tube from the evaporator, discarding the O-ring.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the next step after removing the air cleaner assembly and vacuum brake booster for the 2003 Buick Regal? Posted by Customer
    A:
    Detach the condenser tube from the support clip and disconnect the evaporator tube nut from the condenser tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the procedure for attaching the A/C compressor hose to the accumulator for the 2002 Buick Regal? Posted by Customer
    A:
    Attach the A/C compressor hose to the accumulator and secure the A/C compressor hose nut to the accumulator, tightening it to 16 N.m (12 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the next step after disconnecting the accumulator tube from the accumulator for the 2004 Buick Regal? Posted by Customer
    A:
    Remove the accumulator tube to evaporator core block fitting bolt and disconnect the accumulator tube from the evaporator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What needs to be removed from the evaporator for the 2003 Chevrolet Impala? Posted by Customer
    A:
    Remove the A/C line block fitting bolt from the evaporator and disconnect the evaporator tube from the evaporator, discarding the O-ring.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What components need to be reinstalled after tightening for the 2002 Chevrolet Impala? Posted by Customer
    A:
    Reinstall the evaporator tube/suction hose bracket, the vacuum brake booster, and the air cleaner assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    How do you connect the condenser tube to the evaporator tube for the 2003 Chevrolet Impala? Posted by Customer
    A:
    Connect the condenser tube to the evaporator tube and tighten the evaporator inlet tube nut to 27 N.m (20 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done with the O-ring during disconnection for the 2001 Chevrolet Impala? Posted by Customer
    A:
    Disconnect the evaporator inlet tube from the evaporator and discard the O-ring.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the next step after removing the air cleaner assembly for the 2002 Chevrolet Monte Carlo? Posted by Customer
    A:
    Detach the A/C compressor hose nut from the A/C condenser and remove the hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the next step after securing the hose to the accumulator for the 2001 Chevrolet Monte Carlo? Posted by Customer
    A:
    Connect the hose to the condenser and tighten the corresponding hose nut to 16 N.m (12 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done after removing the air cleaner assembly for the 2003 Chevrolet Monte Carlo? Posted by Customer
    A:
    Detach the A/C compressor hose nut from the A/C condenser and then remove the A/C compressor hose from the A/C condenser.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Blower Motor Tube 52487082 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 52487082 Blower Motor Tube is available in the market under the name GM A/C Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 52487082 Blower Motor Tube fits certain Chevrolet Impala, Monte Carlo models, as well as Buick Regal, Century. Additionally, it is compatible with Pontiac Grand Prix and Oldsmobile Intrigue, Silhouette models.
The original GM component designated by manufacturer part number 52487082 maintains top performance when functioning as the Tube, Air Conditioner Blower Motor Cooling; A/C Refrigerant Liquid Hose; A/C Hose unit. The component 52487082 is constructed from durable material and its dimensions span 6.8 x 6.1 x 1.0 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Tube; Hose; Tube, A/C Blower Motor Cooling; Tube, Heater Motor Cooling. The part 52487082 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.