Make sure this part fits

GM 12565167
Intake Camshaft

2003-2011 GM

Customer Questions & Expert Answers (14)
GM 12565167 Intake Camshaft
  • Part Description
    Camshaft, Engine
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2007 Buick LucerneCXL, CXS8 Cyl 4.6 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    2003-2005 Cadillac DeVilleBase, DHS, Protection Series8 Cyl 4.6 L GAS
    2003-2004 Cadillac SevilleSLS8 Cyl 4.6 L GAS
    2003 Oldsmobile AuroraBase8 Cyl 4.0 L GAS
    2004-2005 Pontiac BonnevilleGXP8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12565167 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12565167 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you install the camshaft intermediate drive shaft for the 2006 Cadillac DTS? Posted by Customer
    A:
    Position the camshaft intermediate drive shaft to the engine, aligning the bolt holes, and install the retaining bolts, tightening them to 10 Nm (89 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you prevent camshaft rotation while removing bolts for the 2003 Cadillac DeVille? Posted by Customer
    A:
    Use an open wrench on the hex cast into the camshafts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you install the camshaft intermediate drive shaft for the 2009 Cadillac DTS? Posted by Customer
    A:
    Position the camshaft intermediate drive shaft to the engine, ensuring the bolt holes are aligned.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the exhaust camshaft sprocket be installed for the 2005 Cadillac DeVille? Posted by Customer
    A:
    Install the exhaust camshaft sprocket so that the camshaft drive pin engages the sprocket notch marked LE.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done after removing the camshaft intermediate drive shaft for the 2010 Cadillac DTS? Posted by Customer
    A:
    Clean and inspect the camshaft intermediate drive shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you lock the crankshaft in position for the 2006 Cadillac DTS? Posted by Customer
    A:
    Lock the crankshaft in position using the Flywheel Holder (J44214).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the first step to set the camshaft timing for the 2003 Cadillac DeVille? Posted by Customer
    A:
    Begin by removing the left camshaft cover, right camshaft cover, engine front cover, three chain tensioners, and oil pump for access.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done after positioning the camshaft intermediate drive shaft for the 2008 Cadillac DTS? Posted by Customer
    A:
    Install the camshaft intermediate drive shaft retaining bolts and tighten them to 15 N.m (11 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done after removing the sprocket for the 2007 Cadillac DTS? Posted by Customer
    A:
    Next, take out the retaining bolts for the camshaft intermediate drive shaft and then remove the drive shaft from the engine.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the procedure for the primary camshaft drive chain tensioner for the 2004 Cadillac DeVille? Posted by Customer
    A:
    Install the primary camshaft drive chain tensioner or release the tensioner shoe, tightening the tensioner bolts to 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the camshaft carriers be prepared for the 2007 Cadillac DTS? Posted by Customer
    A:
    Clean the camshaft carriers, apply lubricant to the camshaft carriers, camshaft lobes, and camshaft journals, and place the camshaft in the carriers with the sprocket drive pins near the top of their rotation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you install the Timing Chain Retention Tool for the 2004 Cadillac Seville? Posted by Customer
    A:
    Rotate its wing nut to the top of its travel, position the bottom retention tool on the cylinder head adjacent to the right exhaust camshaft sprocket and chain, insert the hook end into a secondary timing chain link, and rotate the wing nut until it contacts the retention tool block without tightening it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done with the camshaft intermediate drive shaft after removal for the 2003 Cadillac Seville? Posted by Customer
    A:
    Clean and inspect the camshaft intermediate drive shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Intake Camshaft 12565167 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12565167 Intake Camshaft is available in the market under the name GM Camshaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12565167 Intake Camshaft fits certain Cadillac DTS, DeVille, Seville models, as well as Buick Lucerne. Additionally, it is compatible with Pontiac Bonneville and Oldsmobile Aurora models.
The original GM component designated by manufacturer part number 12565167 maintains top performance when functioning as the Camshaft, Engine unit. The component 12565167 is constructed from durable material and its dimensions span 28.7 x 3.4 x 3.4 inches while weighing 5.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Camshaft. The part 12565167 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.