Make sure this part fits

GM 23190137
Switch

1999-2007 GM

Customer Questions & Expert Answers (16)
GM 23190137 Switch
  • Part Description
    Switch, Transmission Safety Start/Warning
  • Replaces
    26054721
  • Manufacturer
    General Motors
Make sure this part fits
$26.69 MSRP: $43.97
You Save: $17.28 (40%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1999-2006 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV)
    2005, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    1999-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2005 Chevrolet Silverado 2500 HDBase, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 23190137 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 23190137 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step if it has 4WD for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Reinstall the front propeller shaft, lower the vehicle, and check the PNP switch for proper operation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What tool is used to align the PNP switch during installation for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    The J 41364-A Park Neutral Switch Aligner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What should be done after tightening the bolts for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Remove the Park Neutral Switch Aligner (J 41364-A) and, if applicable, the positive assurance bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What is the first step to replace the Park/Neutral Position Switch on the 4L60-E/4L65-E transmission for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    First, apply the park brake and shift the transmission into neutral.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What should be done after reconnecting the PNP switch electrical connector for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    If equipped with 4WD, reinstall the front propeller shaft, lower the vehicle, and check the switch for proper operation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What is the first step to replace the Park/Neutral Position Switch on a 4L60-E automatic transmission for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Apply the parking brake and shift the transmission into neutral.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    How do you install the new switch for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Align the switch hub flats with the manual shaft flats and slide the switch onto the manual shaft until the mounting bracket contacts the transmission's mounting bosses.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What is the next step after removing the manual shaft lever for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Remove the PNP switch bolts and take the PNP switch off the manual shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What should be done after sliding the new PNP switch over the selector shaft for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Install the two bolts to allow the PNP switch to rotate with some effort, tightening them to 27 Nm (20 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    How do you remove the PNP switch for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Remove the PNP switch bolts and take the PNP switch off the manual shaft; if it does not slide off easily, file the outer edge of the manual shaft to remove any burrs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What is the purpose of the positive assurance bracket for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    It eliminates the need for the neutral position adjustment tool when a new switch is installed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What is the installation process for the PNP switch for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Align the PNP switch with the manual shaft flats and slide it onto the manual shaft until the switch mounting bracket contacts the transmission mounting bosses.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What tool is required to remove the detent lever/IMS retaining bolt for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    A T27 TORX(r) bit is required to remove the detent lever/IMS retaining bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What should be done if it is equipped with 4-wheel drive for the 2005 GMC Yukon? Posted by Customer
    A:
    Remove the front propeller shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What should be done after removing the J 41364-A tool for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Reconnect the wiring harness at the vehicle harness and reinstall the transmission control lever with the nut, tightening it to 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Switch 23190137 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 23190137 Switch is available in the market under the name GM Automatic Transmission Shift Position Sensor Switch, Neutral Safety Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 23190137 Switch fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 23190137 maintains top performance when functioning as the Switch, Transmission Safety Start/Warning unit. The component 23190137 is constructed from durable material and its dimensions span 3.4 x 1.6 x 0.8 inches while weighing 0.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Switch, Transmission Safety Starting Switch Or Speed Sensing; Switch, Transmission Shift Brake Interlock. The part 23190137 has available replacement options 26054721. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.