Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 25948725
Lock Actuator, Rear Passenger Side

2002-2009 GM

Customer Questions & Expert Answers (20)
GM 25948725 Lock Actuator, Rear Passenger Side
  • Part Description
    Lock, Rear Side Door; Door Lock Actuator Motor; Door Latch Assembly; Door Lock
  • Position
    Rear Passenger Side
  • Replaces
    15110510, 15079229
  • Manufacturer
    General Motors
Make sure this part fits
$172.26 MSRP: $257.53
You Save: $85.27 (34%)
Ships in 1-2 Business Days
1
ADD TO CART

  • 25948725 Lock Actuator, Rear Passenger Side is Ref No. 6 in the diagram below

    2005 Buick Rainier Lock Actuator, Rear Passenger Side Diagram for 25948725
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 25948725

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25948725 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25948725 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the process for the 2004 Buick Rainier? Posted by Customer
    A:
    Reinstall the inside door handle, connect the lock cylinder rod to the cylinder if equipped, install the lock rod to the outside door handle, secure it with the lock rod retaining clip, and finally reinstall the water deflector and the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step to replace the front side door latch for the 2007 Buick Rainier? Posted by Customer
    A:
    Close the window completely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the final step after securing the actuator for the 2007 Buick Rainier? Posted by Customer
    A:
    Reinstall the lock to the door, followed by the water deflector and the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be removed after the door trim panel for the 2004 Buick Rainier? Posted by Customer
    A:
    The water deflector and the door latch assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What needs to be detached from the latch for the 2007 Buick Rainier? Posted by Customer
    A:
    The inside door handle lock rods and the outside handle lock rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step to replace the power door lock actuator in the front door for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Begin by removing the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the final step in the process for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Reinstall the water deflector and the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you secure the actuator to the lock for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Install the 2 screws that retain the actuator to the lock, tightening them to 0.75 Nm (6 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done if the lock cylinder rod is equipped for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Disconnect the lock cylinder rod from the cylinder, then remove the inside door handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you detach the actuator from the lock for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Take out the 2 screws that secure the actuator to the lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What needs to be disconnected from the outside door handle for the 2009 GMC Envoy? Posted by Customer
    A:
    Disconnect the lock rod retaining clip and remove the lock rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be reconnected after installing the fasteners for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Reconnect the outside handle lock rod to the outside handle and the inside door handle lock rod to the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How should the latch be positioned during installation for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Position the latch back onto the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step in the installation process for the 2003 GMC Envoy? Posted by Customer
    A:
    Attach the actuator to the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you ensure proper engagement of the actuator for the 2008 GMC Envoy? Posted by Customer
    A:
    Rotate the actuator toward the latch to fully engage the rubber bumper and ensure that the first tooth of the gear on the actuator aligns and interlocks properly with the first tooth of the gear on the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after aligning the gears for the 2007 GMC Envoy? Posted by Customer
    A:
    Install the actuator to the top of the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be removed after closing the window for the 2003 GMC Envoy? Posted by Customer
    A:
    Remove the door trim panel and the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is crucial to align during the installation for the 2003 GMC Envoy? Posted by Customer
    A:
    Align and interlock the first tooth of the gear on the actuator with the first tooth of the gear on the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the Front Side Door Lock Actuator for the 2009 GMC Envoy? Posted by Customer
    A:
    Begin by removing the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lock Actuator, Rear Passenger Side 25948725 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25948725 Lock Actuator, Rear Passenger Side is available in the market under the name GM Door Lock, Door Lock Actuator, Door Latch Assembly. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25948725 Lock Actuator, Rear Passenger Side fits certain Chevrolet Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 25948725 maintains top performance when functioning as the Lock, Rear Side Door; Door Lock Actuator Motor; Door Latch Assembly; Door Lock unit at its Rear Passenger Side. The component 25948725 is constructed from durable material and its dimensions span 9.1 x 5.0 x 2.8 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Lock Assembly; Lock; Lock, Door Lock. The part 25948725 has available replacement options 15110510, 15079229. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.