Make sure this part fits

GM 12625990
Camshaft

2004-2011 GM

Customer Questions & Expert Answers (24)
GM 12625990 Camshaft
  • Part Description
    Camshaft, Engine
  • Replaced By
    19420030
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2008 Buick LaCrosseCXS6 Cyl 3.6 L GAS
    2004-2006 Buick RendezvousCX, CXL, CXL Plus, Ultra6 Cyl 3.6 L GAS
    2004-2009 Cadillac CTSBase6 Cyl 3.6 L GAS
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS
    2005-2007 Cadillac STSBase6 Cyl 3.6 L GAS
    2008-2009 Chevrolet EquinoxSport6 Cyl 3.6 L GAS
    2008-2011 Chevrolet MalibuLT, LTZ6 Cyl 3.6 L GAS
    2007-2009 Pontiac G6GTP, GXP6 Cyl 3.6 L GAS
    2008-2009 Pontiac G8Base6 Cyl 3.6 L GAS
    2008-2009 Pontiac TorrentGXP6 Cyl 3.6 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12625990 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12625990 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the right camshaft for the 2005 Buick LaCrosse? Posted by Customer
    A:
    Remove the upper intake manifold along with the lower intake manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be removed after the intake manifolds for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Take off the camshaft cover and the camshaft sensors, followed by the intake camshaft position actuator solenoid.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should not be done with the camshaft position actuator bolt at this time for the 2005 Buick LaCrosse? Posted by Customer
    A:
    Do not remove it; instead, loosen it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you position the camshafts before removal for the 2006 Buick LaCrosse? Posted by Customer
    A:
    Use the Crankshaft Rotation Socket (EN 46111) to rotate the crankshaft until the camshafts are in a neutral (low tension) position, ensuring the camshaft flats are parallel with the camshaft cover rail.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be removed before reinstalling the crankshaft balancer for the 2006 Buick LaCrosse? Posted by Customer
    A:
    Remove the EN 46108.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the next step after locating the camshafts to the cylinder head for the 2007 Buick LaCrosse? Posted by Customer
    A:
    Assemble the camshaft actuators to the camshafts, then install the camshafts and camshaft bearing caps.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the crankshaft be positioned for the 2007 Buick LaCrosse? Posted by Customer
    A:
    Rotate the crankshaft using the Crankshaft Rotation Socket (EN 46111) until the camshafts are in a neutral (low tension) position, ensuring the camshaft flats are parallel with the camshaft cover rail.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be removed after the coolant heater ground lead for the 2004 Cadillac CTS? Posted by Customer
    A:
    Remove the left camshaft cover and the left camshaft drive sprockets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the first step to replace the right camshaft for the 2004 Cadillac CTS? Posted by Customer
    A:
    Begin by removing the right camshaft cover and the right camshaft drive sprockets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the camshaft flats be positioned for the 2005 Cadillac CTS? Posted by Customer
    A:
    Ensure the camshaft flats are parallel with the camshaft cover rail.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done after loosening the camshaft position actuator bolt for the 2004 Cadillac SRX? Posted by Customer
    A:
    Engage the Timing Chain Retention Tool (EN 46108) fully into the timing chain to retain it and tighten the EN 46108 nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the next step after loosening the camshaft position actuator bolt for the 2008 Cadillac CTS? Posted by Customer
    A:
    Unscrew the EN-48313 so that its legs retract, then insert it between the camshaft actuators.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What components should be installed last for the 2006 Cadillac SRX? Posted by Customer
    A:
    Install the intake camshaft position actuator solenoid, camshaft sensors, crankshaft balancer, camshaft cover, and the upper intake manifold with the lower intake manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done with the camshaft intermediate drive shaft after removal for the 2006 Cadillac STS? Posted by Customer
    A:
    Clean and inspect the camshaft intermediate drive shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be ensured about the camshaft flats during rotation for the 2008 Cadillac SRX? Posted by Customer
    A:
    Ensure the camshaft flats are parallel with the camshaft cover rail.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the next step after removing the camshaft components for the 2005 Cadillac SRX? Posted by Customer
    A:
    Remove the crankshaft balancer and rotate the crankshaft using the Crankshaft Rotation Socket (EN 46111) until the camshafts are in a neutral (low tension) position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the final step after installing the retaining bolts for the 2005 Cadillac STS? Posted by Customer
    A:
    Finally, install the camshaft intermediate drive shaft sprocket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the first step in the installation process for the 2009 Cadillac SRX? Posted by Customer
    A:
    Align the camshafts to the cylinder head and assemble the camshaft actuators.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the camshaft flats be positioned for the 2007 Cadillac STS? Posted by Customer
    A:
    Ensure the camshaft flats are parallel with the camshaft cover rail.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done for the left bank exhaust actuator for the 2006 Cadillac STS? Posted by Customer
    A:
    Repeat the alignment process using the timing mark on the front of the exhaust actuator marked LE, install the actuator with the timing mark perpendicular (90°) to the cylinder head deck surface, and secure it with the oil control valve tightened to 120 Nm (89 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done with the used roller followers for the 2008 Chevrolet Malibu? Posted by Customer
    A:
    Ensure that used roller followers are returned to their original positions on the camshaft; if replacing the camshaft, replace the actuated roller followers as well.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the next step after removing the camshaft roller followers for the 2008 Chevrolet Malibu? Posted by Customer
    A:
    Remove the hydraulic element lash adjusters.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done after expanding the legs of the EN-48313 for the 2009 Cadillac CTS? Posted by Customer
    A:
    Insert one leg behind the timing chain guide and continue to expand until the legs contact the timing chain without tightening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Camshaft 12625990 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12625990 Camshaft is available in the market under the name GM Camshaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12625990 Camshaft fits certain Chevrolet Malibu, Equinox models, as well as Cadillac CTS, SRX, STS. Additionally, it is compatible with Buick LaCrosse, Rendezvous and Pontiac G8, G6, Torrent models.
The original GM component designated by manufacturer part number 12625990 maintains top performance when functioning as the Camshaft, Engine unit. The component 12625990 is constructed from durable material and its dimensions span 21.8 x 3.2 x 3.2 inches while weighing 4.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 12625990 has available replacement options listed under 19420030. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.