Make sure this part fits

GM 15993232
Hinge, Passenger Side

1996-2024 GM

Customer Questions & Expert Answers (31)
GM 15993232 Hinge, Passenger Side
  • Part Description
    Hinge Kit, Door Hinge
  • Position
    Passenger Side
  • Manufacturer
    General Motors
Make sure this part fits
$139.89 MSRP: $209.14
You Save: $69.25 (34%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1996-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    1996-2024 Chevrolet Express 2500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    1996-2024 Chevrolet Express 3500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    1996-1999 Chevrolet P30Base6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1996-2014 GMC Savana 1500Base, LS, LT, SLE, SLT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    1996-2024 GMC Savana 2500Base, LS, LT, SLE, SLT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    1996-2024 GMC Savana 3500Base, LS, LT, SLE, SLT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15993232 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15993232 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be applied to the hinge mounting zone before installation for the 2011 Chevrolet Express 1500? Posted by Customer
    A:
    Paint the inner and outer surfaces of the hinge pillar or door at the hinge mounting zone and coat the mating surface of the hinge with a medium-bodied sealer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What size hole should be drilled next for the 2010 Chevrolet Express 2500? Posted by Customer
    A:
    Drill a 13 mm (1/2 in) hole through the hinge base and the body pillar or door using the smaller hole as a pilot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the final tightening torque for the bolts for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Tighten the bolts to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the torque specification for tightening the screws for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    The screws should be tightened to a torque of 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the torque specification for tightening the screws for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Tighten the screws to a torque of 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should you do when replacing both hinges on the same panel for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    Replace one hinge at a time.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the rear door hinge for the 2011 Chevrolet Express 2500? Posted by Customer
    A:
    First, remove the door from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the location of the existing hinges be marked for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Scribe the location of the existing hinges on the body pillar or door and mark the approximate centers of the mig welds on the hinge base.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done with the hinge weld nuggets for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Cut the hinge weld nuggets off and grind the pillar hinge mating surface flush.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done if any weld remains for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Use a chisel to separate the hinge from the body pillar or door, then remove the hinges.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the door hinge pin and bushings on the front door for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    First, remove the hinge pin retainers from the hinge pins.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the rear door hinge for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    First, remove the door from the vehicle and the sealer surrounding the hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the intermediate side door hinge on the body side for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    First, paint the service hinges body color.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you install the upper hinge pin for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Drive the upper hinge pin into the upper hinge with the pointed end up using a soft-faced hammer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the rear side door hinge for the 2000 GMC Savana 3500? Posted by Customer
    A:
    First, remove the door from the vehicle by following the procedures for Rear Door Replacement - Left Side or Rear Door Replacement - Right Side.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What preparation is needed for installation for the 2004 GMC Savana 3500? Posted by Customer
    A:
    Deburr the holes on the inside of the hinge pillar or door to ensure proper seating of the hinge and backing plate, and inspect the hinge seating zone for flatness.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after drilling the pilot holes for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Drill a 13 mm (1/2 in) hole through the hinge base and the body pillar or door using the smaller hole as a pilot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What tool is used to drill out the remainder of the production hinge for the 2010 GMC Savana 3500? Posted by Customer
    A:
    Use a 19 mm (3/4 inch) rota-broach to drill out the remainder of the production hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the final step in the process for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Reinstall the interior trim at the pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after marking the welds for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Drill a 3 mm (1/8 in) pilot hole completely through the spot welds at each center punch mark.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the screws be installed during the hinge installation for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Install the screws, tightening them to 10 N.m (89 In lb).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after marking the 3-hole pattern for the 2011 GMC Savana 1500? Posted by Customer
    A:
    Center punch the marked pattern.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What if any weld remains after drilling for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Use a chisel to separate the hinge from the body pillar or door, then remove the hinges.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should you check before closing the door completely for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Visually check that the lock will correctly engage the striker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What size hole should be drilled next for the 2001 GMC Savana 2500? Posted by Customer
    A:
    Drill a 13 mm (1/2 in) hole through the hinge base and the body pillar or door using the smaller hole as a pilot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How are the new hinges installed for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Install the hinge to the body pillar or door using the bolts and tapping plate supplied with the service replacement kit.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done to the hinge mounting zone before installation for the 2006 GMC Savana 3500? Posted by Customer
    A:
    Paint the inner and outer surfaces of the hinge pillar or door at the hinge mounting zone, and coat the mating surface of the hinge with a medium-bodied sealer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What size pilot hole should be drilled through the spot welds for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Drill a 3 mm (1/8 in) pilot hole completely through the spot welds at each center punch mark.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the hinge be positioned during installation for the 2003 GMC Savana 3500? Posted by Customer
    A:
    With assistance, position the hinge back onto the body and the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after installing the hinges for the 2001 GMC Savana 3500? Posted by Customer
    A:
    Install the door to the body, aligning it as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Hinge, Passenger Side 15993232 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15993232 Hinge, Passenger Side is available in the market under the name GM Door Hinge. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15993232 Hinge, Passenger Side fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 15993232 maintains top performance when functioning as the Hinge Kit, Door Hinge unit at its Passenger Side. The component 15993232 is constructed from durable material and its dimensions span 6.9 x 4.5 x 4.5 inches while weighing 1.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Door Hinge. The part 15993232 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.