Make sure this part fits

GM 19257344
Hinge, Lower

1996-2024 GM

Customer Questions & Expert Answers (31)
GM 19257344 Hinge, Lower
GM 19257344 Hinge, Lower
  • Part Description
    Hinge Kit, Intermediate Side Door Lower (Door & Body Side); Door Hinge
  • Position
    Lower
  • Replaced By
    19540842
  • Replaces
    15993408, 19210560, 19120835
  • Manufacturer
    General Motors
Make sure this part fits
$169.60 MSRP: $253.57
You Save: $83.97 (34%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1996-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    1996-2024 Chevrolet Express 2500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    1996-2024 Chevrolet Express 3500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    1996-1999 Chevrolet P30Base6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1996-2014 GMC Savana 1500Base, LS, LT, SLE, SLT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    1996-2024 GMC Savana 2500Base, LS, LT, SLE, SLT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    1996-2024 GMC Savana 3500Base, LS, LT, SLE, SLT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19257344 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19257344 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after drilling the pilot holes for the 2011 Chevrolet Express 2500? Posted by Customer
    A:
    Drill a 13 mm (1/2 in) hole through the hinge base and the body pillar or door using the smaller hole as a pilot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you install the upper hinge pin for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Drive the upper hinge pin into the upper hinge with the pointed end facing up using a soft-faced hammer, then remove the temporary bolt from the lower hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the bare surface of the pillar hinge mounting area be painted for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Paint according to GM refinish specification GM 4901M-D-2000.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you align the door during installation for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    Align the door and then tighten the screws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What are the last steps after tightening the bolts for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Apply sealer around the hinges, paint the hinge assembly, and reinstall the door to the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the process for drilling the hinge for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    Drill a 3 mm (1/8 in) pilot hole completely through the spot welds at each center punch mark, then drill a 13 mm (1/2 in) hole through the hinge base and the body pillar or door using the smaller hole as a pilot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the front side door hinge for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the sealer surrounding the hinge and scribe the location of the existing hinges on the body pillar or door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after drilling the pilot hole for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Drill a 13 mm (1/2 in) hole through the hinge base and the body pillar or door using the smaller hole as a pilot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    Who should assist in removing the screws and hinge for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    An assistant should help with the removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after installing the hinges for the 2011 Chevrolet Express 1500? Posted by Customer
    A:
    Install the door to the body, aligning it as necessary, and do not close the door completely until visually checking that the lock will correctly engage the striker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the procedure for marking the hinge location for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Tape around the periphery of the body side hinge, move the backing plate rearward 4 mm (0.16 in), then mark the 3-hole pattern for the service backing plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the cargo door hinge for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    Ensure that both hinges on the same panel are replaced one at a time.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done to the hinge mounting zone before installation for the 2010 Chevrolet Express 2500? Posted by Customer
    A:
    Paint the inner and outer surfaces of the hinge pillar or door at the hinge mounting zone, then coat the mating surface of the hinge with a medium-bodied sealer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the final torque for the bolts for the 2001 GMC Savana 2500? Posted by Customer
    A:
    Tighten the bolts to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done during the installation of the hinge for the 2002 GMC Savana 3500? Posted by Customer
    A:
    With an assistant, position the hinge back onto the body and door, ensuring to follow the Fastener Notice in Cautions and Notices.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you remove the lower hinge pin for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Grasp the lower hinge pin with locking pliers and use a soft-faced hammer to drive it out.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the final step after reinstalling the door for the 2011 GMC Savana 1500? Posted by Customer
    A:
    Adjust the adjacent front side door striker as necessary to achieve flushness between the two doors and reinstall the interior trim at the pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the final torque specification for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Tighten to 25 Nm (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the torque specification for tightening the screws for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Tighten the screws to a torque of 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What are the final steps after reinstalling the door for the 2006 GMC Savana 3500? Posted by Customer
    A:
    Finally, apply sealer around the hinges, paint the hinge assembly, and reinstall the door to the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the procedure for marking the hinge location for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Tape around the periphery of the body side hinge, move the backing plate rearward 4 mm (0.16 in), then mark the 3-hole pattern.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you prepare for drilling the pilot holes for the 2010 GMC Savana 3500? Posted by Customer
    A:
    Place the service backing plate on the production hinge surface, mark the 3-hole pattern, center punch, and drill pilot holes with a 3 mm (1/8 in) drill bit.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you separate the hinge if any weld remains for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Use a chisel to separate the hinge from the body pillar or door, then remove the hinges.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after marking the welds for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Drill a 3 mm (1/8 in) pilot hole completely through the spot welds at each center punch mark.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the final torque specification for the door for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Tighten to 25 Nm (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after removing the door for the 2001 GMC Savana 3500? Posted by Customer
    A:
    Eliminate the sealer surrounding the hinge and scribe the location of the existing hinges on the body pillar or door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the front door hinge for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Remove the sealer surrounding the hinge and scribe the location of the existing hinges on the body pillar or door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after removing the door for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Next, detach the hinges from the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be applied to the hinge mounting zone before installation for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Paint the inner and outer surfaces of the hinge pillar or door, then coat the mating surface of the hinge with a medium-bodied sealer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the new hinges be positioned and installed for the 2004 GMC Savana 3500? Posted by Customer
    A:
    Position the bolt-on service replacement hinges within the scribe marks made during removal and install the hinge to the body pillar or door using the bolts and tapping plate supplied with the service replacement kit.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Hinge, Lower 19257344 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19257344 Hinge, Lower is available in the market under the name GM Door Hinge. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19257344 Hinge, Lower fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 19257344 maintains top performance when functioning as the Hinge Kit, Intermediate Side Door Lower (Door & Body Side); Door Hinge unit at its Lower. The component 19257344 is constructed from durable material and its dimensions span 7.2 x 4.5 x 4.5 inches while weighing 1.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hinge Kit, Door Hinge. The part 19257344 has available replacement options listed under 19540842 or 15993408, 19210560, 19120835. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.