Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 19148843
C.V. Joint, Outer

1995-2010 GM

Customer Questions & Expert Answers (29)
GM 19148843 C.V. Joint, Outer
  • Part Description
    Outer CV Joint; CV Joint
  • Position
    Outer
  • Replaces
    26044408, 26075595
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 19148843 C.V. Joint, Outer is Ref No. 5 in the diagram below

    2001 Oldsmobile Aurora C.V. Joint, Outer Diagram for 19148843
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 19148843

  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19148843
    Part DescriptionOuter CV Joint; CV Joint
    Other NamesCV Joints; Outer Joint; Outer Joint Assembly
    Item Dimensions8.7 x 6.7 x 7.4 inches
    Item Weight6.60 Pounds
    PositionOuter
    ConditionNew
    Replaces26044408, 26075595
    ManufacturerGeneral Motors
    SKU19148843
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-1998 Buick CenturyCustom, Limited6 Cyl 3.1 L GAS
    2005-2008 Buick LaCrosseCXS6 Cyl 3.6 L GAS
    1995-2005 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    2006-2007 Buick LucerneCXL, CXS8 Cyl 4.6 L GAS
    1995-2005 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    1997-2004 Buick Regal25th Anniversary Edition, GS, GSE, LS, LSE6 Cyl 3.8 L GAS
    1995-1999 Buick RivieraBase6 Cyl 3.8 L GAS
    1995-1999 Cadillac DeVilleBase, Concours, d'Elegance8 Cyl 4.6 L GAS
    1995-1999 Cadillac EldoradoBase, ESC, ETC8 Cyl 4.6 L GAS
    1995-1999 Cadillac SevilleSLS, STS8 Cyl 4.6 L GAS
    View More

  • Customer Questions & Expert Answers

    Q:
    Is this 19148843 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19148843 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be checked after tightening the clamp for the 2006 Buick Lucerne? Posted by Customer
    A:
    Check the gap dimension on the clamp ear to ensure it reaches 2.60 mm (0.102 inch).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you separate the outboard seal from the CV joint for the 2007 Buick Lucerne? Posted by Customer
    A:
    Separate the outboard seal from the CV joint outer race and wipe the grease from the CV joint inner race.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the process for packing the CV joint for the 2002 Buick Park Avenue? Posted by Customer
    A:
    Insert the chrome balls, packing the CV joint with grease and ensuring the outboard seal is correctly shaped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you remove the CV joint assembly from the bar for the 2002 Buick LeSabre? Posted by Customer
    A:
    Use Snap Ring Pliers (J8059) to spread the ears on the race retaining ring before removing the CV joint assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the procedure for aligning the halfshaft inboard seal for the 2007 Buick LaCrosse? Posted by Customer
    A:
    Slide the large diameter of the halfshaft inboard seal over the trilobal tripot bushing and locate the lip of the seal in the groove.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you insert the chrome balls back into the CV joint for the 2001 Buick LeSabre? Posted by Customer
    A:
    Align the cage and inner race with the outer race and insert the first chrome ball, repeating until all six balls are in place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you ensure the CV joint is properly seated for the 2007 Buick LaCrosse? Posted by Customer
    A:
    Push the CV joint onto the halfshaft bar until the retaining ring is seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What tools are required for the replacement of the Wheel Drive Shaft Outer Joint and Seal for the 2005 Buick LeSabre? Posted by Customer
    A:
    Drive Axle Seal Clamp Pliers (J 35910), Drive Axle Swage Ring Clamp (J 41048), and Snap Ring Pliers (J 8059).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you remove the large seal retaining clamp for the 2004 Buick LeSabre? Posted by Customer
    A:
    Cut through the swage ring with a hand grinder and remove the clamp using side cutters, ensuring not to damage the inboard seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you prepare the halfshaft bar for assembly for the 2006 Buick LaCrosse? Posted by Customer
    A:
    Clean the halfshaft bar with a wire brush to remove rust in the seal mounting area.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you remove the swage ring for the 2003 Buick Park Avenue? Posted by Customer
    A:
    Use a hand grinder to cut through the swage ring for removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What should be done after installing the new trilobal tripot bushing for the 2005 Buick LeSabre? Posted by Customer
    A:
    Position the larger new seal retaining clamp on the halfshaft inboard seal and slide the housing over the tripot joint spider assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How should the bolts be tightened during assembly for the 2007 Buick Lucerne? Posted by Customer
    A:
    Tighten the bolts alternately until snug.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the next step after removing the CV joint assembly for the 2001 Buick Park Avenue? Posted by Customer
    A:
    Remove the seal from the bar and gently tap the CV joint cage with a brass drift and hammer to remove all six chrome alloy balls.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What steps are involved in greasing and repacking for the 2004 Buick Park Avenue? Posted by Customer
    A:
    Grease the halfshaft inboard seal and repack the housing, then install the trilobal tripot bushing and position the larger new seal retaining clamp on the inboard seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you remove the CV joint assembly from the bar for the 2005 Buick Park Avenue? Posted by Customer
    A:
    Use J 8059 to spread the ears on the race retaining ring.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the first step in the process for the 2005 Buick LaCrosse? Posted by Customer
    A:
    Remove the large seal retaining clamp from the CV joint with a side cutter and discard it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What should be done to the tripot joint spider assembly and housing for the 2002 Buick Regal? Posted by Customer
    A:
    Clean them thoroughly with cleaning solvent, removing all traces of old grease and contaminants, and dry all parts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you swage the ring for the 2001 Buick Regal? Posted by Customer
    A:
    Use J 41048 (Small Swage Tool) to swage the ring by aligning it and tightening the bolts until snug, alternating between each bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the procedure for installing the new trilobal tripot bushing for the 2004 Chevrolet Monte Carlo? Posted by Customer
    A:
    Install the new trilobal tripot bushing to the housing, ensuring it is flush with the face, then position the larger new clamp on the inboard seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you prepare the housing for installation for the 2003 Chevrolet Impala? Posted by Customer
    A:
    Reseat the spacer ring in the groove, apply grease from the service kit to the inboard seal, and repack the housing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What should be done if equipped with a spacer ring for the 2007 Chevrolet Impala? Posted by Customer
    A:
    Install the spacer ring into the groove of the halfshaft bar using Snap Ring Pliers (J 8059), then slide the tripot joint spider assembly onto the halfshaft bar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What should be done after installing the CV joint for the 2008 Chevrolet Impala? Posted by Customer
    A:
    Install the boot clamps on both the boot and the CV joint housing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you clean the halfshaft bar for the 2006 Chevrolet Impala? Posted by Customer
    A:
    Use a wire brush to remove rust in the seal mounting area.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What should be done with the grease on the CV joint inner race for the 2003 Chevrolet Impala? Posted by Customer
    A:
    Wipe the grease from the face of the CV joint inner race.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the next step after securing the halfshaft assembly for the 2001 Chevrolet Impala? Posted by Customer
    A:
    Install the spacer ring and spider assembly using J 8059, ensuring both rings are fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What should be done to clean the components before assembly for the 2001 Chevrolet Monte Carlo? Posted by Customer
    A:
    Clean the inner and outer race assemblies, CV joint cage, and balls thoroughly with cleaning solvent, ensuring all old grease and contaminants are removed before drying the parts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you remove the swage ring for the 2004 Chevrolet Impala? Posted by Customer
    A:
    Use a hand grinder to cut through the swage ring for removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19148843, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19148843 C.V. Joint, Outer. It is sometimes referred to as GM CV Joint. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19148843 C.V. Joint, Outer. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery